Audited Supplier
Large Cale Mining Sand Washing Equipment Wheel Bucket Spiral Sand Washer
XS sand washer adopts the technology in the world with high energy sowing. It has such features and reasonable structure, large capacity, high washing degree, less loss of medium and fine sand, less breakdown and less wear with driving part separated from water and sand. Its breakdown rate is much lower than screw sand washer. This machine has become customers' priority to choose in the sand industry domestic and abroad. | | |
1.Simple structure, wide range of use:
Impeller drive bearing device and water and water material isolation, greatly avoiding the bearing due to water, sand and pollutants lead to damage, so it can be applied to a variety of working environments.
2. good sealing performance, high efficiency and environmental protection:
Good structural layout, effective sealing design, so that the equipment is less wear and tear, durable; low water consumption, low noise, in line with national environmental standards.
3.High washing degree, low production cost:
Bucket wheel sand washer has three functions of cleaning, dewatering and grading; driven by the impeller, the sand and gravel grind each other to remove the impurities covering the surface of the sand and gravel, while destroying the water vapour layer covering the sand grains and completing the function of cleaning and removing impurities in the strong water current.
4.Novel structure, good cleaning effect:
Novel sealing structure, fully enclosed oil bath transmission device, adjustable overflow weir plate ensures that this series of products are highly efficient, durable, with good cleaning and dewatering effect, and the fine-grained products remain stable.
The motor drives the impeller to rotate slowly after decelerating through the triangle belt, speed reducer and gears, and the sand and gravel have the feeding trough to enter into the washing tank, tumbling under the driving of the impeller and grinding each other to remove the impurities covering the surface of the sand and gravel, and at the same time destroying the water-vapour layer that covers the sand and gravel to facilitate the dewatering; and atthe same time, adding water to form a strong water current, which will take away the impurities and the small specific gravity of the foreign matters in time and be discharged from the overflow opening of the washing tank to complete the cleaning effect. The clean gravel is taken away by the blades, and finally the gravel is poured into the discharging tank from the rotating impeller to complete the cleaning of gravel.
| Model | Bucket wheel diameter (mm) | Speed (r/min) | Capacity (t/h) | Power (kw) | Dimension (mm) | Weight (kg) |
| XS2600 | 2600 | 2.5 | 20-50 | 5.5 | 3515*2070*2672 | 2500 |
| XS2600II | 2600 | 2.5 | 30-70 | 5.5 | 3515*2070*2672 | 2900 |
| XS2800 | 2800 | 1.2 | 50-100 | 7.5 | 3900*3300*2990 | 3980 |
| XS3200 | 3200 | 1 | 80-120 | 11 | 3965*4440*3410 | 7270 |
| XS3600 | 3600 | 1 | 120-180 | 15 | 4355*4505*3810 | 9430 |
| |
Our company is a professional manufacturer of complete sets of mineral processing machinery, cement, chemical, building materials and other equipment, with a production history of more than 40 years. Its main products are: Jaw crusher, Hammer crusher, Roller crusher, Impact Crusher, Ball Mill, Rod Mill, Rotary Kiln, Stone Production Line, Sand Making Machinery, Mobile Crushing Station, Organic Fertilizer production line, magnetic separator, jig machine, slime dryer, sludge dryer, limestone ash machine, dryer, cooler, pelletizing machine, vibrating screen, automatic sand return spiral classification Machines, high-efficiency and energy-saving flotation machines, mining mixing tanks, feeders, thickeners, lifting conveyors, screw conveyors and other mechanical equipment..
Q1: Hi, are you mining machinery manufacturer?
A: Yes, our company warmly welcome clients to visit our plant at any time. We can also provide samples test, mine design, equipment manufacture, after-sale service, etc...
Q2: which country have your products been exported?
A: We have been exported business for 10 years and we have lots of customers and agents in the world, such as Switzerland, Malaysia, South Africa, Canada, America, etc...
Q3: What Information should customers give us to provide you suitable quotation and service?
A: What minerals are you separating?
What's the maximum size of your raw minerals?
How much capacity do you need per hour for your project?
Q4: How long is the warranty of your equipment? Does your company supply the spare parts?
A: The warranty period of equipment is one year. And of course, we will supply the spare parts for you at lowest cost.
Q5: If I need the complete mineral processing line, can you help us to build it?
A: Yes, we can help you combine a complete mineral processing line and give you related professional advice if you need. We had already built many mining projects in China & Overseas.
