Audited Supplier
RBCuZn-C/HS221
Flux-cored Wire
Brass
Containing Flux
Acidic
10-20mm
Blue,Pink,White, Red
500mm, 1000mm
1kg,2.5kg, 5kg, 10 Kg Per Tube
300kgs
800
Cu56-60,Ni 0.8-1.1,Fe 0.25-1
Rbcuzn-C/HS221
DA YANG /OEM
by Plastic Tube
1.6mm, 2.0mm, 2.5mm, 3.0mm, 3.2mm, 4.0mm, 5.0mm
China
8311100000
Product Description
White Flux Coated Brass Brazing Alloy Rod
RBCUZN-A RBCUZN-B RBCUZN-C RBCUZN-D
Description
RBCuZn-C Low fuming bronze (bare and flux coated) is a general-purpose, copper base alloy brazing rod used extensively for gas brazing steel, copper alloys, cast iron, nickel alloys and stainless steel. Its low fuming characteristic and good mechanical properties make this alloy a widely used general-purpose product. Preheating is recommended for some applications and a bronze brazing flux is required if the rod is not coated. This brazing rod has a low melting point making it easily machinable and excellent for sheet metal work. This alloy also possesses high tensile strength and good ductility.
Application
They are suitable for gas-flame brazing, high temperature drazing of copper and copper alloys, nickel, cast iron and hard alloys. During oxy-acetylene brazing, to heat with oxidized flame quickly, and can lessen evaporation of zinc and prevent porosity from overoxidization. The optimum joint gap is 0.025-0.1mm. Flux is also necessary to obtain good brazing seam.
Product Specification
Product looks
Package & Delivery
Packaging Details:
1kg per inner plastic tube
or 2.5kg per inner plastic tube
or 5.0 kg per inner plastic tube
or 100pcs per inner plastic tube
OEM package available for White Flux Coated Brass Brazing Alloy Rod
Delivery Detail: With 25days after receiving your order confirmation
RBCUZN-A RBCUZN-B RBCUZN-C RBCUZN-D
Description
RBCuZn-C Low fuming bronze (bare and flux coated) is a general-purpose, copper base alloy brazing rod used extensively for gas brazing steel, copper alloys, cast iron, nickel alloys and stainless steel. Its low fuming characteristic and good mechanical properties make this alloy a widely used general-purpose product. Preheating is recommended for some applications and a bronze brazing flux is required if the rod is not coated. This brazing rod has a low melting point making it easily machinable and excellent for sheet metal work. This alloy also possesses high tensile strength and good ductility.
Application
They are suitable for gas-flame brazing, high temperature drazing of copper and copper alloys, nickel, cast iron and hard alloys. During oxy-acetylene brazing, to heat with oxidized flame quickly, and can lessen evaporation of zinc and prevent porosity from overoxidization. The optimum joint gap is 0.025-0.1mm. Flux is also necessary to obtain good brazing seam.
Product Specification
Product looks
Package & Delivery
Packaging Details:
1kg per inner plastic tube
or 2.5kg per inner plastic tube
or 5.0 kg per inner plastic tube
or 100pcs per inner plastic tube
OEM package available for White Flux Coated Brass Brazing Alloy Rod
Delivery Detail: With 25days after receiving your order confirmation
