Audited Supplier
KM-92S-A
CE, ISO
New
Customized
Manual
Horizontal
Manual Hydraulic Hose Crimping Machine Km-92s-a
1/8 Inch to 1 Inch
54mm
Special Steel
From Taiwan
Blue
26.5kg
305*370*270(mm)
Kangmai
Standard Export Plywood Case
Approved CE and ISO
Handan, China
8479819000
Product Description
Technical Data Of KM-92S-A Manual Hydraulic Hose Crimping Machine
| Model No. | KM-92S-A |
| Crimping range | 1/8 ich -1 inch 2SN |
| Swaging force | 1040KN |
| Pump | Maual Pump |
| Opening without dies | φ54mm |
| Opening | ≥ 17mm |
| Oil box | 328ml |
| Hydraulic oil | L-HM32 |
| No. of standard die sets | 7 sets |
| Weight | 26.5 kg |
| Systematic pressure | 30Mpa |
Advantages Of KM-92S-A Manual Hydraulic Hose Crimping Machine
1).Small volume,low weight (only 26.5KGS) and easy to be moved;
2).When crimping to the pre-set size, indicator light will be on;
3).Suitable for outdoor, non-electricity manipulation;
4).Load-off handwheel make the die return fast.
Dies Information:
Dovetail Type Dies 7 sets, easy to install
When crimp elbow fittings, after crimp, you can take out one or two jaws, then take the crimped hose out easily.
Applications Of Manual Hydraulic Hose Crimping Machine KM-92S-A
1).Suitable for OUT DOOR MAINTAINCE, ONLY 26.5KGS, EASY TO CARRY.
2).Suitable for 1 inch/25mm hydraulic oil hose.
3).Suitable for washing hose, bathroom pipe.
Hydraulic Hose Crimper why not choose Kangmai?
1). Kangmai hose crimper has approved CE & ISO and audited by SGS.
2). The fitting and hoses crimped by kangmai machine never leakage the oil and never broken. The reason are like below:
(a)The machine head process by CNC machine, roundness and taper is within 0.1mm.
(b)The machine die base and dies adopt special die steel and process by advances craft,the hardness is above 55HRC. The die hardness is enough so that the die life is very long and easy to crimping high pressure hydraulic hose, such as 4SP even 6SP.
(c)The technical of machine head is forging or cast. Casting is cheap but has small hole on the machine head. The piston will divide from casting machine head.
