Audited Supplier
Wind blade trailer in mountain is designed for heavy equipment blade transport. So far, it can transport blades up to 60 meters long. Aiming at the complicated road conditions in the process of mountain windmill blade transportation, combined with the actual needs of the transportation process, a special blade transportation equipment was designed.
When use this wind blade trailer in mountain, the wind power blade can be fixed to the rotary platform, and the rotary platform itself can be rotated 360 degrees, and the fixing device itself can also be rotated. When encountering a complicated road condition that is difficult to pass directly, the blade can be rotated to any one. The angle suitable for passing greatly increases the passing performance of the vehicle, making the wind power transportation safer and more convenient.
A special adapter for wind blade trailer in mountain is attached to the rear axle of the low bed semi-trailer. Connect the root of the windmill mountain trailer directly to the flange of the adapter and grasp the bracket. Through the hydraulic cylinder, the blades will be lifted in the air, the length is short, and the transportation is convenient. During transport, the blade's lifting angle is between 0 and 55 degrees.
Wind blade trailer in mountain is suitable for different types of trucks, and can also change the ground clearance of the trailer to adapt to poor road conditions. During transport, the blades will be lifted and swung left and right to avoid trees, mountains, wires and other obstacles. The wind blade trailer in mountain effectively solves the problem of mountain transportation and becomes the main transportation equipment.
feature:
*The blade transfer adapter is driven by a hydraulic unit.
*The leaf spring is located below, the cargo platform is lower, the longitudinal beam is free to pull, and the passability is good.
* The rear axle uses a suspension system to solve foreseeable loading difficulties.
* Equipped with hydraulic steering system, greatly reducing the difficulty of steering.
* The twin-axle steering system is equipped with a small hydraulic station for manual steering.
* The distance between the weight box and the swing platform can be adjusted with hydraulic cylinders as needed.
