Audited Supplier
Monel 400
Wire
Monel 400
Monel 400
ISO
New
Bright
Monel 400
Thermal Spray Coating
1.6mm
15kg
ISO9001
Wisdom
Coating
Prime Raw Material
Worldwide
WISDOM
Caston Inside, Wooden of Outside
ISO9001
Shanghai, China
75052200
Product Description
Introduction
Monel400
Monel 400 shows high strength and excellent corrosion resistance in a range of acidic and alkaline environments and especially suitable for reducing conditions. It also has good ductility and thermal conductivity.
It can Equivalent to: Tafa70T.
Surface Preparation
Surface should be clean, white metal, with no oxides (rust), dirt, grease, or oil on the surface to be coated. Note: It is best not to handle surfaces after cleaning. Recommended method of preparation is, to grit blast with 24 mesh aluminum oxide, rough grind, or rough machine in a lathe.
Application
Ceramic Under Coat
Oxidation Resistance
High Temperature
Chemical Composition
Physical Properties
Typical Deposit Characteristics
Standard Sizes & Packing
Other sizes (diameter and wire weight) can be produced by customers' requirement.
Monel400
Monel 400 shows high strength and excellent corrosion resistance in a range of acidic and alkaline environments and especially suitable for reducing conditions. It also has good ductility and thermal conductivity.
It can Equivalent to: Tafa70T.
Surface Preparation
Surface should be clean, white metal, with no oxides (rust), dirt, grease, or oil on the surface to be coated. Note: It is best not to handle surfaces after cleaning. Recommended method of preparation is, to grit blast with 24 mesh aluminum oxide, rough grind, or rough machine in a lathe.
Application
Ceramic Under Coat
Oxidation Resistance
High Temperature
Chemical Composition
| Type | Composition | ||||||
| Ni | Fe | Cu | C | Mn | Si | S | |
| Monel 400 | Min 63 | Max 2.5 | 28-34 | Max 0.3 | Max 2 | Max 0.5 | Max 0.024 |
Physical Properties
| Grade | Density | Melting Point |
| Monel 400 | 8.83g/cm3 | 1350 |
Typical Deposit Characteristics
| Typical Hardness | Bond Strength | Deposit Rate | Deposit Efficiency | Machilityineab |
| HRB 84 | 4310 psi | 10 lbs /hr/100A | 70% | Good |
Standard Sizes & Packing
| Diameter | Packing | Wire Weight |
| 1/16 (1.6mm) | D 300 Spool | 15kg/spool |
