Audited Supplier
X/B
Cycloidal
Circular Gear
6 (ISO1328)
high carbon chromium steel
cast iron
HRC58-62
according to your requirement
cycloidal
grinding gear
DOFINE
Wooden Case
CCC, CE, CQC, ISO
China
8483409000
Product Description
X series cycloidal reducer with High Strength, Credibility and Long Lifespan Made of Bearing Steel
Key Specifications/Special Features:
1. Motor: Y or other selected, single, signle-phase and three phase
2. Type of input: Motor, flanged and shaft
3. Transmission stage: single stage and two-stage
4. Installation selection: Horizontal, vertical and flange of quadrate
5. Fit for clockwise and counter clockwise and compact volume
6. Ratio range: 9 to 5133
7. Power rage: 0.12-55kw
Advantages
1. High ratio and efficiency, can achieve 87:1 ratio only With single - stage transmission, if use Multistage transmission, the ratio can be higher, and needle-tooth meshing is rolling friction, no relative silding on the mesh surface, so the efficiency is up to 94%,
2. Because adapt the planetary transmission theory, the input shaft and output shaft are on the same axis, which make the model samll size.
3. More meshing teeth and high overlapping coefficient, making low vibration and noise.
4. Main parts use high carbon chromium steel, quenched processing (HRC58-62) to obtain high strength, and some of the transmission use rolling fiction, so it has reliable and long lifetime.
5. Reasonable design, easy maintenance, easy installation, simple lubrication and few parts, and can be used at any angle and direction.
Key Specifications/Special Features:
1. Motor: Y or other selected, single, signle-phase and three phase
2. Type of input: Motor, flanged and shaft
3. Transmission stage: single stage and two-stage
4. Installation selection: Horizontal, vertical and flange of quadrate
5. Fit for clockwise and counter clockwise and compact volume
6. Ratio range: 9 to 5133
7. Power rage: 0.12-55kw
Advantages
1. High ratio and efficiency, can achieve 87:1 ratio only With single - stage transmission, if use Multistage transmission, the ratio can be higher, and needle-tooth meshing is rolling friction, no relative silding on the mesh surface, so the efficiency is up to 94%,
2. Because adapt the planetary transmission theory, the input shaft and output shaft are on the same axis, which make the model samll size.
3. More meshing teeth and high overlapping coefficient, making low vibration and noise.
4. Main parts use high carbon chromium steel, quenched processing (HRC58-62) to obtain high strength, and some of the transmission use rolling fiction, so it has reliable and long lifetime.
5. Reasonable design, easy maintenance, easy installation, simple lubrication and few parts, and can be used at any angle and direction.
