Audited Supplier
DRH-600
Online Service
1 Year
Insulation Material, Glass, Fiber, Foam XPS/EPS
ISO 8301, ISO8302, DIN En 12939, ASTM
Hunan Zhenhua
122*82*129
1.5CBM
China
9031809090
Product Description
DRH-600 Heat flow meter Thermal Conductivity Tester
It is mainly used to test the thermal conductivity, thermal resistance of insulation materials, glass, fiber, foam and so on. Testing materials include fiber board, loosing filler glass fiber, ceramic fiber, foam plastic (XPS/EPS/EPP/PUR, etc.), inter-layer composite plate, vacuum plate, cement(concrete) products, glass rock wool, filler materials, gypsum board and so on. DRH300 coefficient of heat conductivity measurements conform to ISO 8301, ISO8302, JIS b 1412, DIN EN 12939, ASTM C518, ASTM C177 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation and relevant international standards. It is in full compliance with the national thermal conductivity measurement standard with its stable and accurate temperature control technology, computer interface, software's real-time monitoring and control, data processing and saving connecting. With these advantages, it is applied widely in materials properties detection organization, scientific research institution, quality detection department of factory, institutions of higher education teaching and research.
Main features:
It is mainly used to test the thermal conductivity, thermal resistance of insulation materials, glass, fiber, foam and so on. Testing materials include fiber board, loosing filler glass fiber, ceramic fiber, foam plastic (XPS/EPS/EPP/PUR, etc.), inter-layer composite plate, vacuum plate, cement(concrete) products, glass rock wool, filler materials, gypsum board and so on. DRH300 coefficient of heat conductivity measurements conform to ISO 8301, ISO8302, JIS b 1412, DIN EN 12939, ASTM C518, ASTM C177 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation and relevant international standards. It is in full compliance with the national thermal conductivity measurement standard with its stable and accurate temperature control technology, computer interface, software's real-time monitoring and control, data processing and saving connecting. With these advantages, it is applied widely in materials properties detection organization, scientific research institution, quality detection department of factory, institutions of higher education teaching and research.
Main features:
- Fully insulated test chamber to avoid external influences
- Compensation for test piece's thickness and the average temperature.
- External cooling with tap water or recirculation cooler for different temperature ranges
- Electrically operated plate lifting mechanism
- Automatic measurement of sample thickness
- Equipped with an integrated Single Board Computer touch screen system
- Interface: USB or RS232 connect to the additional PC installed with the thermal conductivity coefficient testing software
| Thermal conductivity range | 0.005 ~ 3.0 W/m.K |
| Cooling system | External water bath/compressed air |
| Hot plate temperature | RT~99.99ºC |
| Cold plate temperature | 0°C ~60°C thermostatic control with high precision digital display temperature instrument |
| Cold, hot plate temperature difference | 20ºC |
| Temperature control accuracy/resolution | 0.1ºC/0.01ºC |
| Sample size(W×L×H) | Max 600×600×200 mm |
| Automatic thickness measurement | High-precision displacement sensor is used and connected with computer to measure thickness automatically; resolution 0.01mm. |
| Thermal resistance range | 0.1 ~ 8.0 m2K/W |
| Repeatability | ±2% |
| Accuracy | 1%~3% |
| Environmental condition | room temperature: 18~25ºC, humidity: 20~80%RH |
| Data result analysis | Automatic thermal analysis software, Windows 10/7/XP, English |
| Supply voltage | AC 220V±5%, power: 3.0kw |
| Product list: | DRH-600 Test host with touch screen system, Precision cryogenic water tank, Testing software , Calibration sample |
