Audited Supplier
Y19A
New
Customized
Paint Spray Gun
Y19A Hand-Hold and Air-Leg Rock Drill
OEM
CE
High Pressure Gun
Reciprocating Type
Pulse pneumatic wrench
Tunnel
Qianshao
Semi-automatic
Hand press
GM
Cartons
CE
China
Product Description
Products Description
Y19A rock drill is mainly used in small quarries,small coal mines and limestone mines for drilling,blasting for constructing roads in mountain areas,also in the capital construction for water conservancy works.it is suitable for drilling works in large mines for boulder blasting and other projects as well. When it is matched with air- leg model FT100,it can perform both dry and wet drilling under various kinds of rocks,and it is evenmore flexible in drilling operation when matched with the small- size compressor of capacity of 1.5m3,the function will be better than others.
Specification
Weight | 19kg |
Outside dimensions(L×W×H) | 600×534×157mm |
Cylinder dia | 65mm |
Piston stroke | 54mm |
Air pressure | 0.4~0.5Mpa |
Air pipe inner dia | 19mm |
Water pipe inner dia | 13mm |
Shank dimension | 22×108mm |
Direction for use
1,This machine can perform both dry and wet drilling ,do not remove the water tube during operation,otherwise it will not work regularly and lose the function of normal blowing or centre water-jnjection,and slso damage the inner parts ,the function of normal blowing can be selected according to the working condition,when it is need ,remove the water pipe nut Y26-302F of blowing injection,and replace with a water pipe nut Y26-302S and a water injection hose Y26-303.
2,Before operating the machine,fill the oil tank of Model FY200A with lubricating oil.be careful if there is no oil in the oil tank. Operating without lubricating oil is not allowed.
3,When assemble the rubber handle,you should take care of the rear rubber ribs.the right handle is clockwise,and the left handle is counterclockwise.
2,Before operating the machine,fill the oil tank of Model FY200A with lubricating oil.be careful if there is no oil in the oil tank. Operating without lubricating oil is not allowed.
3,When assemble the rubber handle,you should take care of the rear rubber ribs.the right handle is clockwise,and the left handle is counterclockwise.
