Audited Supplier
Ni
DIN, ANSI
Stainless Steel
Male
Galvanized Sheet
1/16''~2''
Hydraulic/Gas/Water
YC-LOK
Wooden Box
stainless steel/brass
Jiangsu China
7307930000
Product Description
YC-LOK Hydraulic Fittings Adapter Nipple (Metric, Bsp, NPT, Orfs, Unf)
Product Type and Model
there are many kinds and numbers of products, which can provide a variety of choices.90 deg Elbow/Tee/PLUG/Cross/ Thread O-Ring Face Seal Fittings . The quality is comparable to swagelok. Buyers have other models. We can customize them according to the model drawings after communication.
Wear-resistant, heat-resistant products, suitable for a variety of scenarios, rest assured to buy.
MORE PRODUCTS
For more details, please contact us.
We can give precise drawing introduction and precise quotation according to the demand.
Packaging and Shipping
All YC-LOK orders are packaged in-house by our employees in strong cartons wrapped in protective caps. All packages are clearly labeled with text and bar information. Then we will put boxes into an wooden case with a big plastic bags.
As usually we delivery order 45-60 days after the order. Customers may also inquire about our Just-In-Time manufacturing process or expedited manufacture and shipping for products needed within 24 hours.
We are manufacturing and marketing all kinds of hydraulic fittings, we can also produce according to customers' drawings or samples
Product application & ensure
fittings for air and liquid connections.Automobile, engineering Machinery, Lathe, Machinery, Metallurgy, Petroleum, mine, construction, chemical industry, shipbuilding, spacecraft, military, Textile, Ocean,Recreation, Electronics and many other fields related with hydraulic and their delivery system of fluid and gas etc;
high Quality Standards
As an ISO 9001 certificated manufactory, we ensure that our design and manufacturing processes are the highest quality by maintaining proper certification and in-house inspections.
Under the requirement of ISO, we have a rotating gage calibration schedule to make sure the dimensions of each fitting component is 100% accurate based on specified measurements.
We have a professional quality inspection team. Individually trained employees control the manufacturing process with strict statistical analysis and control. We can ensure that each identical fitting component you order is true to the design specifications.
Our tube fittings ensure:
1)safe, reliable and leak-proof connection;
2)Easy to install, disconnect and retighten;
3)No torque is transmitted to tubing during installation
GOOD SERVICE:
We will respond to you within 24 hours. We manufacture non-standard parts according to your drawings. And we will continue to serve you after sales and will be responsable for the mistakes from us.
LOW PRICE:
The prices of our production are reasonable! The prices will be much better if your quantity is good.
PERFECT QUALITY:
We have strict quality control from producing to delivery.Our company had strong technology support, 80% of our colleagues are master or bachelor's degree. We have cultivated a group of managers who are familiar with product quality , good at modern concept of management.
About company
Advantage
1We have more than 10 years of manufacturing experience.
2.Customers whoc cooperate with us can gain a lot of benefit from our professional team and good quality products.
3.We can supply all kinds of hydraulic fittings. Just send us your drawings or technical reference,we can customize items for you.
4. We can supply hydraulic fittings with international standard, ISO, BSP, NPT,etc
Brief introducation
Jiangsu YiCheng Fluid Equipment Co.,Ltd was founded in 2008,
the main products are tube fittings,pipe fittings,hose fittings,
hydraulic fittings,flange and other products,widely used in high
pressue hydraulic industry,cement industry,chemicals,food
processing,nuclear,oil,gas,paper industry,railway and ship building.
YC-LOK is the leader in flow control technology fields of
manufacturers.Our target is beyoud the technical limits,become
the industry leader.Since the establishment,we have settled the
developing direction of research and develop precise value,
regulator,fluid connectors and high-tech flow control system products.
Contact us
Jiangsu Yicheng Fluid Equipment Co.,Ltd
Jason Gao
FAQ
Q1.Can I get free samples?
A: Yes,we can provide you the free sample, but you need to bear their own delivery costs.
Q2. Can I have a sample order for fittings?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q3. Are you a trading company or a manufacturer?
A: We are a manufacturer.
Q4. What is your payment term?
A:Normally T/T 50% in advance, balance to be paid before delivery.
Q5: What is your main market?
A:North America,Greenland,South America,Africa,Southeast Asia, Former Soviet Republics ,East Asia,and Europe.
Q6:What kind of trade terms can you do?
A:EX-WORKS,FOB,CFR,CIF,etc.
Q7. What about the lead time?
A:Sample needs 15 days, mass production time needs 35 days.
Product Type and Model
| type | PART No. |
| MALE 24°CONE SEAT L.T. | 1C |
| MALE 24°CONE SEAT H.T. | 1D |
| O-RING MALE FLAT SEAT | 1E |
| MALE FLAT SEAT | 1H |
| MALE 60°CONE SEAT | 1M |
| METRIC MALE 60°CONE SEAT | 1M-GM |
| 60°METRIC MALE/60°METRIC MALE | 1K |
there are many kinds and numbers of products, which can provide a variety of choices.90 deg Elbow/Tee/PLUG/Cross/ Thread O-Ring Face Seal Fittings . The quality is comparable to swagelok. Buyers have other models. We can customize them according to the model drawings after communication.
Wear-resistant, heat-resistant products, suitable for a variety of scenarios, rest assured to buy.
MORE PRODUCTS
For more details, please contact us.
We can give precise drawing introduction and precise quotation according to the demand.
Packaging and Shipping
All YC-LOK orders are packaged in-house by our employees in strong cartons wrapped in protective caps. All packages are clearly labeled with text and bar information. Then we will put boxes into an wooden case with a big plastic bags.
As usually we delivery order 45-60 days after the order. Customers may also inquire about our Just-In-Time manufacturing process or expedited manufacture and shipping for products needed within 24 hours.
We are manufacturing and marketing all kinds of hydraulic fittings, we can also produce according to customers' drawings or samples
Product application & ensure
fittings for air and liquid connections.Automobile, engineering Machinery, Lathe, Machinery, Metallurgy, Petroleum, mine, construction, chemical industry, shipbuilding, spacecraft, military, Textile, Ocean,Recreation, Electronics and many other fields related with hydraulic and their delivery system of fluid and gas etc;
high Quality Standards
As an ISO 9001 certificated manufactory, we ensure that our design and manufacturing processes are the highest quality by maintaining proper certification and in-house inspections.
Under the requirement of ISO, we have a rotating gage calibration schedule to make sure the dimensions of each fitting component is 100% accurate based on specified measurements.
We have a professional quality inspection team. Individually trained employees control the manufacturing process with strict statistical analysis and control. We can ensure that each identical fitting component you order is true to the design specifications.
Our tube fittings ensure:
1)safe, reliable and leak-proof connection;
2)Easy to install, disconnect and retighten;
3)No torque is transmitted to tubing during installation
GOOD SERVICE:
We will respond to you within 24 hours. We manufacture non-standard parts according to your drawings. And we will continue to serve you after sales and will be responsable for the mistakes from us.
LOW PRICE:
The prices of our production are reasonable! The prices will be much better if your quantity is good.
PERFECT QUALITY:
We have strict quality control from producing to delivery.Our company had strong technology support, 80% of our colleagues are master or bachelor's degree. We have cultivated a group of managers who are familiar with product quality , good at modern concept of management.
About company
Advantage
1We have more than 10 years of manufacturing experience.
2.Customers whoc cooperate with us can gain a lot of benefit from our professional team and good quality products.
3.We can supply all kinds of hydraulic fittings. Just send us your drawings or technical reference,we can customize items for you.
4. We can supply hydraulic fittings with international standard, ISO, BSP, NPT,etc
Brief introducation
Jiangsu YiCheng Fluid Equipment Co.,Ltd was founded in 2008,
the main products are tube fittings,pipe fittings,hose fittings,
hydraulic fittings,flange and other products,widely used in high
pressue hydraulic industry,cement industry,chemicals,food
processing,nuclear,oil,gas,paper industry,railway and ship building.
YC-LOK is the leader in flow control technology fields of
manufacturers.Our target is beyoud the technical limits,become
the industry leader.Since the establishment,we have settled the
developing direction of research and develop precise value,
regulator,fluid connectors and high-tech flow control system products.
Contact us
Jiangsu Yicheng Fluid Equipment Co.,Ltd
Jason Gao
FAQ
Q1.Can I get free samples?
A: Yes,we can provide you the free sample, but you need to bear their own delivery costs.
Q2. Can I have a sample order for fittings?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q3. Are you a trading company or a manufacturer?
A: We are a manufacturer.
Q4. What is your payment term?
A:Normally T/T 50% in advance, balance to be paid before delivery.
Q5: What is your main market?
A:North America,Greenland,South America,Africa,Southeast Asia, Former Soviet Republics ,East Asia,and Europe.
Q6:What kind of trade terms can you do?
A:EX-WORKS,FOB,CFR,CIF,etc.
Q7. What about the lead time?
A:Sample needs 15 days, mass production time needs 35 days.
