Audited Supplier
- applies the high-strength low-carbon alloy steel for gears and gear shaft, with tooth flank carbureted, quenched and ground, to meet the gear precision at level 6(GB/T10095) and hardness of tooth flank HRC54-62
- At front end of hollow input axis there is a large specification thrust bearing that will bear axial thrust force while the screw is working
- compact, high in bearing capacity, stable in transmission, low noise, high efficiency and more
Various plastic rubber industry
- The input rotation of prime mover shall be ≤1500rpm
- The peripheral speed of gear drive shall be≤20m/s
- The working ambient temperature shall be within -40°C~45°C. Per heat the lubricating oil to above 0°C when the ambient temperature is below 0°C.
- Rotation is available both forwards and backwards.
item | value | |||
| Output Speed (R/Min) | 8-20 | |||
| Output Torque (Kn) | 41-590 | |||
| Power (Kw) | 5.5-540 | |||
| Material | Cast Iron | |||
Guangdong Lingyi Industrial Technology Co., Ltd set up since 1997, with 20 years development, we become one of the best companies in the industry for mechanical and electrical products system integration, logistics service and investment. The company has set up 21 subsidiaries located in southern, central, eastern and northern China, .
The products categories include:
1, Transmission Products: High and low voltage electric motors, geared motors, gear boxes, bearings, inverter and complete electrical cabinets
2, Automation Products: Automation systems, motion control, low voltage control products and systems, sensor and communication products,
3, Power distribution Products: Low-voltage power distribution products, medium voltage circuit breaker, intelligent building system and equipment.
4, Machinery components.
Count on our 20 years industry experiences. Guangdong Lingyi Industrial Technology Co., Ltd give you one-stop industrial products sourcing, procurement, system integration and services, satisfy your different needs in the industry.
We are looking forward to cooperating with you.
1. Who are we?
We are based in Foshan, China, start from 2015,sell to DomesticMarket(89.00%),Eastem Europe(3.00%),SoutheastAsia(2.00%),SouthAmerica(2.00%),Northern Europe(1.00%),Western Europe(1.00%),Oceania(1.00%),NorthAmerica(1.00%) There are total about 11-50 people in our office.
2. How about the after services and technical?
We offer 24 hours online customer service and The technical support and guidance online.
3. How can we guarantee quality?
Always a pre-production sample before mass production,Always final Inspection by Take photo and video as your demands before shipment:We provide you 3 months guarantee for used and 1 YEAR warranty for new.
4. How about the packing when they are sent out?
In order to save the freight and reduce your budget, we choose the packaging forenvironment-friendly. We use foam board with 3 cm thick to fill in all around the box insideto protect parts, then use carton to pack the parts, but if thev are too heavy, we wilcustomized the wooden box for them.
5. What terms services can we provide?
1:Payment: T/T, Paypal, Western union, etc
2:Express: UPS,DHL,FEDEX,TNT,EMS ,etc
