Audited Supplier
ZPU-08G
1 Year
1 Year
Electric
Grease Lubrication
Electric
High Pressure
dajing
Plywood
50kg
China
8413502090
Product Description
ZPU electric grease lubrication pump
applicable to high lubricant frequency, dense lubrication points , is used to supply grease both in 40 MPa pressure dual line and single line centralized lubrication system. Also applicable to low oil frequency, less lubrication points, big oil pump capacity, easily to remove when fitted with wheel, tube, oil gun and wire.
Technical Parameters
Lubricants: grease with penetration of no less than 265 (25°C,150g) 1/10mm and lubricant oils with viscosity of no less than N68.
Temperature: from -20°C to 80°C
Overview
ZPU electric lubrication pump applicable to high lubricant frequency, dense lubrication points , is used to supply grease both in 40 MPa pressure dual line and single line centralized lubrication system. Also applicable to low oil frequency, less lubrication points, big oil pump capacity, easily to remove when fitted with wheel, tube, oil gun and wire.
Technical Parameters
Lubricants: grease with penetration of no less than 265 (25°C,150g) 1/10mm and lubricant oils with viscosity of no less than N68.
Temperature: from -20°C to 80°C
Dimension
1tank 2 pump base 3 plunger pump with connecting flange
4 motor 5 oil in port G3/4 6 oil return port G3/4 7pressure relief valve 8 oil out port G3/4 9 filter 10 one-way valve
Installation
1. Pump should be fixed right in the place with suitable temperature, less dust, facilitate inspection, maintenance and adding lubricants.
2. Pump should be installed in the central position of the system, to ensure the pump produce enough pressure.
3. Should use clean grease. Should inject grease from the oil-in place on the tank by lubricant feed pump. Before the first time use the pump, better feed with lubricant oil to take out the air.
4. After three months use of motor, should add lubricants of 3# aluminum disulfide, then add more every four months.
5. outdoor work or bad environment work should take protective measures.
applicable to high lubricant frequency, dense lubrication points , is used to supply grease both in 40 MPa pressure dual line and single line centralized lubrication system. Also applicable to low oil frequency, less lubrication points, big oil pump capacity, easily to remove when fitted with wheel, tube, oil gun and wire.
Technical Parameters
| model | pressure | flow rate | tank | motor | weight |
| MPa | ml/time | L | kw | kg | |
| ZPU-08G | 40 | 133 | 40 | 0.55 | 76 |
| ZPU-14G | 233 | 60 | 0.75 | 84 | |
| ZPU-24G | 400 | 100 | 1.5 | 92 |
Lubricants: grease with penetration of no less than 265 (25°C,150g) 1/10mm and lubricant oils with viscosity of no less than N68.
Temperature: from -20°C to 80°C
Overview
ZPU electric lubrication pump applicable to high lubricant frequency, dense lubrication points , is used to supply grease both in 40 MPa pressure dual line and single line centralized lubrication system. Also applicable to low oil frequency, less lubrication points, big oil pump capacity, easily to remove when fitted with wheel, tube, oil gun and wire.
Technical Parameters
| model | pressure | flow rate | tank | motor | weight |
| MPa | ml/time | L | kw | kg | |
| ZPU-08G | 40 | 133 | 40 | 0.55 | 76 |
| ZPU-14G | 233 | 60 | 0.75 | 84 | |
| ZPU-24G | 400 | 100 | 1.5 | 92 |
Lubricants: grease with penetration of no less than 265 (25°C,150g) 1/10mm and lubricant oils with viscosity of no less than N68.
Temperature: from -20°C to 80°C
Dimension
1tank 2 pump base 3 plunger pump with connecting flange
4 motor 5 oil in port G3/4 6 oil return port G3/4 7pressure relief valve 8 oil out port G3/4 9 filter 10 one-way valve
| model | 40L | 60L | 100L | 0.55kW 60rpm | 0.75kW 100rpm | 1.5kW 180rpm |
| D | Φ325 | Φ325 | Φ500 | |||
| H | 822 | 1077 | 1027 | |||
| L | 510 | 530 | 575 | |||
Installation
1. Pump should be fixed right in the place with suitable temperature, less dust, facilitate inspection, maintenance and adding lubricants.
2. Pump should be installed in the central position of the system, to ensure the pump produce enough pressure.
3. Should use clean grease. Should inject grease from the oil-in place on the tank by lubricant feed pump. Before the first time use the pump, better feed with lubricant oil to take out the air.
4. After three months use of motor, should add lubricants of 3# aluminum disulfide, then add more every four months.
5. outdoor work or bad environment work should take protective measures.
