Audited Supplier
ZYNJ160-10
ISO
Φ40-Φ156 mm
10kn.M
Petroleum Drilling Tool & Accessory
Screw-on and Screw-off Machinery
Electric
Wooden Case
China
8431431000
Product Description
ZYNJ-160/10 hydraulic screw-on machine is designed as hydraulic, mechanical-electrical integrated type, and is mainly applicable to the flow process of the production line of oil, casing, down-hole tools and oil-well pump installation collar. The equipment is operated by means of hand-operated reversal valve, featuring simple and convenient operation. The main tong and backup tong adopt star clamping mechanism, featuring wide clamping range and adjustable speed. Within the applicable range of clamping, there is no need to change the tooth plates. This machine is featured by high operating efficiency and convenient operation and use.
Product standard configuration and Technical Specifications
Product standard configuration and Technical Specifications
| Configuration Name | Technical Specifications | QTY | Unit | Packing | Remarks | |
Console | Control the operating handle according to the pressure gauge | 1 | Set | Wooden cases | ||
Hydraulic Power System | Motor:power 15KW speed1460r/min, Required power:380V,frequency for:50HZ | 1 | Set | Wooden cases | ||
| Hydraulic pump type: Vane pump | ||||||
| Turnbuckle mechanism maximum working pressure: 10 mpa | ||||||
| Oil tank capacity:500L | ||||||
Make up/ breat out host machine | Tailstock | Pipe dia.:Φ40-156mm | 1 | Set | Wooden cases | |
| Walking speed :adjustable | ||||||
| The clamping accuracy: ≤ 1.5 mm | ||||||
spinning wrench | Pipe dia.:Φ40-156mm | 1 | Set | |||
| Make-up torque range:0.05-10KN.m | ||||||
| Break-out torque range:0.05-10KN.m | ||||||
| Turnbuckle Angle: 360 hovering at any position | ||||||
| The clamping accuracy: ≤ 1.5 mm | ||||||
| Base | Length:3.5m | 1 | Set | |||
