Audited Supplier
Product Introduction:YDAH-102 cable fireproof coating is a new type of fireproof coating successfully developed by our company in accordance with the standard of the Ministry of Public Security GB28374-2012. It is a water-based (oil-based) fireproof coating that is widely used on electric wires and cables in China at present. When the coating of this product is exposed to fire, it can form a uniform and dense sponge-like foamy heat-insulating layer, which can effectively suppress and block the spread and extension of the flame, thus playing a protective role for electric wires and cables. Its main advantages are as follows: it is environmentally friendly, pollution-free, non-toxic and odorless, and does not pose a threat to the health of the application personnel. This product also features a thin coating, strong adhesion and good flexibility, and has excellent insulation and anti-corrosion functions.
This product is widely used for the flame retardant treatment of electric wires and cables in power plants, industrial and mining enterprises, telecommunications and civil buildings. It can also be used for the fire protection of combustible substrates such as wooden structures, metal structures and underground projects.
Performance Indicators:
| State in the container | Fineness | Viscosity | Drying time | Oil resistance | Heat and moisture resistance | Freeze-thaw cycle resistance | Flexural resistance |
| No lumps, presenting a uniform state after being stirred | ≤ 90 μm | ≥ 70 s | Surface dry ≤ 5 h, hard dry ≤ 24 h | After being soaked for 7 days, the coating has no wrinkling, peeling or bubbling | After being soaked for 7 days, the coating has no wrinkling, peeling or bubbling | After 15 cycles, the coating has no wrinkling, peeling or bubbling | The coating has no delamination, falling off or peeling |
Construction Instructions:
Step 1: Before applying the cable fireproof coating, the floating dust, oil stains, debris and other substances on the surface of the cable should be cleaned and polished thoroughly. The construction of the fireproof coating can only be carried out after the surface is dried.
Step 2: The construction of the cable fireproof coating can adopt spraying, brushing and other methods. When using it, it should be stirred evenly. When the coating is a bit thick, an appropriate amount of tap water can be used for dilution to make it convenient for spraying.
Step 3: During the construction process and before the coating is dried, it should be protected from water, exposure to the sun, pollution, movement and bending. If there is any damage, it should be repaired in a timely manner.
Step 4: The thickness of each coating layer should be appropriate so that the coating does not flow down. Generally, the thickness of the first coating layer is about 0.3 - 0.5 mm. The next coating layer can be applied after the previous one is basically cured until the coating reaches the thickness required by the fire resistance limit grade. For electric wires and cables with plastic or rubber outer skins, generally, they are directly coated more than 5 times, and the thickness of the coating is 0.5 - 1 mm, with an approximate consumption of 1.5 kg/m². For insulated cables wrapped with oiled paper, a layer of glass fiber cloth should be wrapped first and then the coating is applied. If the construction is carried out outdoors or in a humid environment, the corresponding finishing varnish should be added.
Packaging and Transportation:
- The cable fireproof coating is packaged in metal or plastic barrels.
- The cable fireproof coating should be stored in a cool, dry and ventilated environment.
- During the transportation of the product, it should be protected from sunlight, rain, damage to the packaging barrels, tipping and overflowing.
- The effective storage period of the cable fireproof coating is 6 months.
Q1, Are you manufacturer or trading factory?
A: In fact we are the factory more then 10 years, can supply all types of paint.
Q2, If the OEM is accepted?
A: Yes, OEM is welcome. We also can do your own logo and package.
Q3, If I do not know which paint to choose, what shall I do?
A: Please no need to worried about this, we have the professional engineer, colorist, and experienced sales, can give you the suggestion for paint and coating.
Q4, What's are your payment term?
A: We can accept the TT, Western Uniono, LC, Credit card, and Alipay, and others please contact with us freely.
Q5, Can you accept to supply the free sample?
A: Yes, of course we are glad to supply the free sample, and you need in charge of the freight cost.
Q6, What's your products' advantages?
A. Good quality and competitive prices.
B. Strictly quality control when producing.
C. Professional team work, from design, development, producing,assemble,packing and shipping.
D. Experience for shipping the paint to different countries.
Q7, Can we visit your factory?
You are Warmly welcomed to visit our factory, it would be our great pleasure!
