Audited Supplier
GBHW-500H Mono Block Bridge Saw Machine
Application
1.This machine is our newest model Bridge Saw, With steel structure, installed and connected wire already, easy for buyer use/move/maintenance.
2. The saw blade is mounted directly on the motor shaft (direct drive), which provides ease and rigidity.
3. The main motor is double speed motor and has good water protect.
4. It uses imported liner guide way in the two supports that improves cutting precision and longer life, and in order to get higher precision, on the beam there are two pcs imported liner guide way to hold the cutter head, and cutter head moving on these two guide way, moreover the cutter head moving up/down is also by ball screw and liner guide way;
5. The table can rotate 360 degree , blade can rotate 90degree horizontally, blade can tilt 0 to 60 degree vertically to cut angle or chamfer;
6. Beam slicing motor installed in the middle of beam back, different with common bridge saw which is installed in one side;
7. PLC, inverters are all from SIMENSE
Technical Data
| Name | Unit | GBHW-500H |
| Saw Blade size | mm | D.350 to D.500 |
| Max cross stroke | mm | 3300 |
| Max up-down stroke | mm | 230 |
| Blade Tilting degree | ° | 0-60° |
| table max tilting degree | ° | 0-85° |
| table rotating degree | º | 360° and stop at 0°,45°,90°,180°,360° |
| Table size | mm | 3200*2000 |
| Guide rail type of side beam | / | 2pcs Linear Guideway with high precision, one right and one left |
| Guide rails type of cutter head moving on the crossbeam | / | 2pcs Linear Guideway with high precision, one in the top and one on the front side |
| Guide rails type of cutter head up/down | / | Ball screw + 1pc linear guideway |
| Cutter head moving speed | mm/min | 0-6500 |
| Main motor | kw | 18.5 (two speed) |
| Main axis speed | r/min | High speed:2900; Low speed: 1460 |
| machine size | mm | 5800×3250×2300 |
| Total weight | kg | 6100 |
