Audited Supplier
HPM series UPS is developed as a high frequency on line modular UPS for medium and large data center, adopting fully digital control technology, fully guarantee power supply to operate reliably and stably; diversified option of modular power, accurately position user side requirements; flexible redundancy design greatly increase the system availabity, user can realize expansion as demand, and modular structure greatly increase the convenience for maintenance.
General Features
Adopting digital control design, and the control system is more reliable
High power density design, capacity of single power module is 6KVA/ 10KVA/ 15KVA/ 20KVA/ 25KVA/ 30KVA/ 40KVA, the height of all these modules is 3U.The power of system ranged from 6KVA to 520KVA corresponds to the number of parallel power modules from 1 to 13
Redundant control system, each power module is equipped independent control system, and control itself independently according to the sharing message, and the fault module separates from the system automatically
Support parallel expansion for cabinet, and parallel expansion is up to 4 cabinets.
Voltage of batteries can be configured flexibly, 1 input 1 output/ 3 input 1 output ±96Vdc/ ±108Vdc/ ±120Vdc(16/18/20PCS)selectable; 3 input 3 output±216Vdc/±228Vdc/±240Vdc (32/34/ 36/38/40PCS) selectable
Intelligent charging mode, Charging current can be configured , there are 3 charging mode which are constant current mode,constant voltage mode,floating charging mode, and the charging mode can be transfer smoothly.
Technical Specification
| MODEL | HPM3325-250KVA | HPM3330-90KVA | HPM3330-150KVA | HPM3330-300KVA | HPM3340-200KVA | HPM3340-320KVA | HPM3340-400KVA | HPM3340-520KVA | HPM3340-800KVA | HPM3340-1280KVA | HPM3340-1560KVA | |
| Capacity (VA/Watts) | UPS cabinet | 250k / 225k | 90k / 81k | 150k / 135k | 300k / 270k | 200k/180k | 320k/288k | 400k / 360k | 520k / 468k | 800k / 720k | 1280k / 1152k | 1560k / 1404k |
| HPM module | 25k / 22.5k | 25k / 22.5k, 30k / 27k | 40k / 36k | |||||||||
| INPUT | ||||||||||||
| Nominal voltage | 380/400/415Vac, (3Ph+N+PE) | |||||||||||
| Operating voltage range | 208~478Vac for half load; 305~478Va c for full load | |||||||||||
| Operating frequency range | 40~70Hz | |||||||||||
| Power factor | ≥0.99 | |||||||||||
| Harmonic distortion (THDi) | 3%(100% non-linear load) | |||||||||||
| Bypass voltage range | 380Vac Max.voltage: +25%(optional +10%,+15%,+20% ) 400Vac Max.voltage: +20% (optional +10%,+15%) 415Vac Max.voltage: +15% (optional +10%) Min.voltage: -45% (optional -20%,-30%) | |||||||||||
| Bypass frequency range | Frequency synchronize tracing range:±10% | |||||||||||
| Generator access | Support | |||||||||||
| OUTPUT | ||||||||||||
| Rated voltage | 380/400/415Vac(3Ph+N+PE) | |||||||||||
| Power factor | 0.9 | |||||||||||
| Voltage regulation | ±1% | |||||||||||
| Frequency | Line mode | ±1%/±2%/±4%/±5%/±10% of the rated frequency(optional) | ||||||||||
| Bat. mode | (50/60±0.1%)Hz | |||||||||||
| Crest factor | 3:1 | |||||||||||
| Harmonic distortion (THDv) | ≤2% with linear load ≤5% with non-linear load | |||||||||||
| Efficiency | 95.00% | |||||||||||
| BATTERY | ||||||||||||
| Battery voltage | ±192/±204/±216/±228/±240Vdc; Battery quantity(optional) | |||||||||||
| Charging current(A) | UPS cabinet | 60A (Max.) | 30A (Max.) | 50A (Max.) | 100A (Max.) | 50A (Max.) | 80A (Max.) | 100A (Max.) | 130A (Max.) | 200A (Max.) | 320A (Max.) | 390A (Max.) |
| HPM module | 6A (Max.) | 25kVA:6A (Max.) / 30kVA:10A (Max.) | 10A (Max.) | |||||||||
| Backup time | Depends on the capacity of external batteries | |||||||||||
| SYSTEM FEATURES | ||||||||||||
| Transfer time | Utility to battery:0ms; Utility to bypass:0ms | |||||||||||
| Overload | Line mode | Load≤110%: last 60min,≤125%: last 10min,≤150%: last 1min,≥150% turn to bypass mode immediately | ||||||||||
| Bat. mode | Load≤110%: last 10min,≤125%: last 1min,≤150%: last 1S,≥150% shut down UPS immediately | Load≤110%: last 60min,≤125%: last 10min,≤150%: last 1min,≥150% shut down UPS immediately | ||||||||||
| Bypass mode | Breaker (25kVA:40A) | Breaker ( 25kVA:40A / 30kVA:60A) | 40kVA:95A | |||||||||
| Short circuit | Hold whole system | |||||||||||
| Noise suppression | Complies with EN62040-2 | |||||||||||
| Communication interface | UPS cabinet : RS232, RS485, Dry contact, Intelligent slot x 2(SNMP card,Relay card optional); HPM series UPS module: RS232 | |||||||||||
| ENVIRONMENT | ||||||||||||
| Operating temperature | 0~40ºC | |||||||||||
| Storage temperature | -25~55ºC | |||||||||||
| Humidity range | 0~95% (Non-condensing) | |||||||||||
| Altitude | <1500m. When >1500m, derating power for use | |||||||||||
| Noise level | <70dB | <65dB | <70dB | <73dB | ||||||||
| PHYSICAL | ||||||||||||
| Dimension D×W×H (mm) | UPS cabinet | 1100×600×2000 | 840×600×1400 | 1100×600×2000 | 850×600×1600 | 850×600×2000 | 850×1200×2000 | 850×2000×2000 | 850×3400×2000 | 4800×850×2000 | ||
| HPM module | 443x580x131 (3U) | |||||||||||
| Net weight (kg) | UPS cabinet | 290 | 158 | 170 | 307 | 251 | 320 | 540 | 980 | 1400 | 2800 | |
| HPM module | 32 | 25kVA/32; 30kVA/33.5 | 36 | |||||||||
| STANDARDS | ||||||||||||
| Safety | IEC/EN62040-1,IEC/EN60950-1 | |||||||||||
| EMC | IEC/EN62040-2,IEC61000-4-2,IEC61000-4-3,IEC61000-4-4, IEC61000-4-5,IEC61000-4-6,IEC61000-4-8 | |||||||||||
