$1298.00
2 Pieces (MOQ)
Inmax Manufacturer M12 Switch IP40 9V 12V 24V 36V with 16 Port
Shenzhen InMax Co., Ltd.
Swipe or use the arrows to view product images.
9440-8I Brand New Tri-Mode Storage Adapter 12GB/S Ports Sas Expander
| Price | $72.00 |
|---|---|
| Min Order | 2 pieces |
| Availability | In Stock |
| Shipping From | Jiangsu, China |
| Popularity | 406 people viewed |
Model NO.:
9440-8i
Communication Mode:
Full-Duplex & Half-Duplex
Type:
Storage Adapter
Transmission Rate:
12GB/S
Ports:
≦8
Trademark:
Broadcom
Transport Package:
Carton Packing
Origin:
Malaysia
Product Description
ATTENTION: Perform all installation work at
an electrostatic discharge (ESD)-
safe workstation that meets the
requirements of EIA-625.
Requirements for Handling
Electrostatic Discharge Sensitive
Devices. You must perform all
actions in accordance to the
latest revision of the IPC-A-610
ESD-recommended practices
an electrostatic discharge (ESD)-
safe workstation that meets the
requirements of EIA-625.
Requirements for Handling
Electrostatic Discharge Sensitive
Devices. You must perform all
actions in accordance to the
latest revision of the IPC-A-610
ESD-recommended practices
| Product Name | Storage Adapter |
| Warranty | 1 Years |
| Storage Temp / Humidity | -40 to 85ºC |
| Products Status | Brand-new |
| Output | 12-36V |
| 1. Unpack the HBA, and inspect it for damage. | Remove the HBA from the antistatic bag, and carefully inspect the device for damage. If you notice any damage, contact LSI or your reseller support representative. |
| 2. Prepare the computer. | Turn off the computer, and disconnect the power cord from the rear of the power supply. |
| 3. Remove the cover from the chassis. | |
| 4. Check the mounting bracket on the HBA (system-dependent). | If required for your system, replace the full-height mounting bracket that ships on the HBA with the low-profile bracket supplied. Complete step a through step d to attach the short bracket. |
| 5. Insert the HBA into an available PCIe® slot. | Locate an empty x8 PCIe slot. Remove the blank bracket panel on the rear of the computer that aligns with the empty PCIe slot. Save this bracket screw, if applicable. Align the HBA to a PCIe slot. Press down gently, but firmly, to seat the HBA correctly in the slot. The following figure shows how to insert the HBA into a PCIe slot. |
- Similar Products
Negotiable
1 Piece (MOQ)
Cisco 9200 24 Port Switch C9200L-24t-4G-E
Beijing skylink Technology Co., Ltd.