Swipe or use the arrows to view product images.
Agglomerated Welding Flux Sj301 for Spiral Welded Steel Pipe
| Price | $450.00 |
|---|---|
| Min Order | 1 Ton |
| Availability | In Stock |
| Shipping From | Shandong, China |
| Popularity | 517 people viewed |
Model NO.:
LH-SJ301
state:
Solid
pH:
Alkaline
Type:
Inorganic
Melting Point:
>600℃
Chemical Composition:
Sio2+TiO2=25-35
Function:
Remove Oxides, Protect Weld Metal
Application:
Submerged-arc Welding, Structural Steel, Spiral Pipe, LPG Cylinder
Manufacturing Method:
Smelting
Size:
10-60mesh
Basicity:
1.0
Quality System:
ISO9001:2000
OEM:
Offered
Performance:
Slag Easy Remove
Steel:
Low-Carbon & Low Alloy
Model Number:
Sj301
Color:
Gray
Usages:
LGP Tanks, Pipeline Steel, Ships, Vehicles
Wire:
EL8, EL12, Em12K
Trademark:
Panding
Transport Package:
Kraft Bag with Plastic Lining Inside
Specification:
25kg/bag, 40bags/wooden pallet
Origin:
Laiwu City, Shandong Province, China
HS Code:
381090000
Product Description
Agglomerated Welding Flux SJ301 for Spiral Welded Steel Pipe
Technical Data Sheet
1.Specification:
AWS-A5.17 F6A0-EL8 F7A2-EM12K EN760 SA CS 1 89 AC H5
2.Description:
SJ301 is an agglomerated calcium-silicate type welding flux. Basicity: 1. 0 (B//W) It is gray and round grain,mesh:10-40.Regularly shaped welds are deposited without reduction of area or interface notches. Slag detachability is good. A short slag is produced, thus allowing circumferential welding on small-diameter workpieces without the risk of uncontrolled slag. The production of large pipes(especially spiral pipe welding) is a typical application for this flux. Relatively high manganese pick-up is obtained,thus allowing the flux to be used with wires with a low Mn content.
(3)Applications:
The flux is fit for the submerge-arc welding of low-carbon steel and low-alloy steel. Butt and flat fillet welding of miniature LPG tanks pipeline steel,ships,vehicles,agricultural implements,machinery,boilers,bridges,structural steels.
(4)Chemical Composition(%)
(5)Mechanical Performance of the Deposited Metal
(6)The Instruction of usages:
Re-dried under 300-350ºC for 2 hours.
Rust,grease and moisture on the weldment should be removed before welding.
Product Picture
Application of Submerged Arc Welding Flux
1.Spiral Welded Steel Pipe
2.Steel Structure & H Beam Steel
3.LPG Cylinder &Gas Cylinder Boday
4.Hardfacing& Roll Reclamation
5.Vehicles &Ships&Briages
Packing & Shipping
(1)Bag:25 KGS/Kraft Bag With Plastic Lining Inside
(2)Pallet:40 Bags(1 Ton)/Plywood Pallet
(3)Container:20-24 Tons/Container
(4)OEM Packing Design Can Be Accept According To Your Requirement
Company Brief Introduction
FAQ
1.Are you a factory or a trading company?
LaiWu HuLin Welding Materials Co., Ltd. is a professional factory of welding wire&welding flux.
2.Is OEM available?
Yes, OEM is available.
3.Is the sample available?
Yes, free samples are available for you to test the quality.
4.What about the price terms?
CIF, CFR, FOB
5.How about the payment terms?
(1)30% T/T in advance, 70% balance against B/L copy.
(2)L/C at sight.
6.What about the delivery time?
Within 7 days after receipt Of payment.
7.What is the MOQ?
One Ton.
8.What about the package?
Forward Welding Package/Neutral Package/OEM Package
Technical Data Sheet
1.Specification:
AWS-A5.17 F6A0-EL8 F7A2-EM12K EN760 SA CS 1 89 AC H5
2.Description:
SJ301 is an agglomerated calcium-silicate type welding flux. Basicity: 1. 0 (B//W) It is gray and round grain,mesh:10-40.Regularly shaped welds are deposited without reduction of area or interface notches. Slag detachability is good. A short slag is produced, thus allowing circumferential welding on small-diameter workpieces without the risk of uncontrolled slag. The production of large pipes(especially spiral pipe welding) is a typical application for this flux. Relatively high manganese pick-up is obtained,thus allowing the flux to be used with wires with a low Mn content.
(3)Applications:
The flux is fit for the submerge-arc welding of low-carbon steel and low-alloy steel. Butt and flat fillet welding of miniature LPG tanks pipeline steel,ships,vehicles,agricultural implements,machinery,boilers,bridges,structural steels.
(4)Chemical Composition(%)
| SiO2+TiO2 | Al2O3+MnO | CaO+MgO | CaF2 | S | P |
| 25-35 | 30-40 | 15-25 | 5-15 | ≤0.05 | ≤0.05 |
(5)Mechanical Performance of the Deposited Metal
Wires | Standard Models | Yield Point Rel(MPa) | Tensile Strength Rm(MPa) | Elongation A (%) | Impact Value Kv2(J) |
| EL8 EM12K | F6A0-EL8 F7A2-EM12K | ≥350 ≥410 | 415-550 480-650 | ≥22 ≥30 | ≥40(0ºC) ≥60(-20ºC) |
(6)The Instruction of usages:
Re-dried under 300-350ºC for 2 hours.
Rust,grease and moisture on the weldment should be removed before welding.
Product Picture
Application of Submerged Arc Welding Flux
1.Spiral Welded Steel Pipe
2.Steel Structure & H Beam Steel
3.LPG Cylinder &Gas Cylinder Boday
4.Hardfacing& Roll Reclamation
5.Vehicles &Ships&Briages
Packing & Shipping
(1)Bag:25 KGS/Kraft Bag With Plastic Lining Inside
(2)Pallet:40 Bags(1 Ton)/Plywood Pallet
(3)Container:20-24 Tons/Container
(4)OEM Packing Design Can Be Accept According To Your Requirement
Company Brief Introduction
FAQ
1.Are you a factory or a trading company?
LaiWu HuLin Welding Materials Co., Ltd. is a professional factory of welding wire&welding flux.
2.Is OEM available?
Yes, OEM is available.
3.Is the sample available?
Yes, free samples are available for you to test the quality.
4.What about the price terms?
CIF, CFR, FOB
5.How about the payment terms?
(1)30% T/T in advance, 70% balance against B/L copy.
(2)L/C at sight.
6.What about the delivery time?
Within 7 days after receipt Of payment.
7.What is the MOQ?
One Ton.
8.What about the package?
Forward Welding Package/Neutral Package/OEM Package
- Similar Products
$0.60
5000 kg (MOQ)
Flux for Submerged Arc Welding Sj101
Hangzhou Linan Dayang Welding Material Co., Ltd.