Swipe or use the arrows to view product images.
Current Transformer with Clamp-on 1000A/1A & 1000A/5A
| Price | $158.00 |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Beijing, China |
| Popularity | 453 people viewed |
Model NO.:
P50
Type:
Electromagnetic
Output Signal Type:
Analog Output
Production Process:
Integration
Material:
Stainless Steel
Accuracy Grade:
0.1G
Application:
Instruments
IP Rating:
IP30
Certification:
CE
Customized:
Customized
Types:
Current Transformer
Ratio:
1000:1
Weight:
550g
Color:
Blue
Range:
0-1200A
Output Signal:
0-5A AC
Output Lead:
2.5m Cable
Class:
0.1
Usage:
Energy Meter Calibration
Jaw:
50mm
Trademark:
GFUVE
Transport Package:
Standard Export Box
Specification:
Q50, 0.1, 0.2, 0.5
Origin:
Beijing
Product Description
P50 Current Transformer with Clamp-on 1000A/1A
The model P50 current transformer clamp is designed for fast and easy measure the current in industrial and power environment, it has wide range of current measurement.current clamp p50 price is cheaper than CA current clamp, low phase shift, high precision 0.1% and good quality!
S type and P type, Q type AC Current Clamp are designed to extend the current measuring capabilities of DMMs or BNC, power instruments, oscilloscopes, hand-held scopes, recorders or loggers, clamp type grounding resistance tester, double clamp phase angle meter, energy meter calibrator and other diverse instruments.
The current clamp is placed around the current-carrying conductor to perform non-contact current measurements without interrupting the circuit under test. The clamp outputs current or voltage signals directly proportional to the measured current, thereby providing current measuring and displaying capabilities to instruments with low current or voltage inputs.
FEATURES
Suitable for 1000A cable online measurement
Holding wire diameter: φ50mm
Dimension: 101mm×219mm×26mm
Load capacity: mA output≤4Ω, 1A output 0.1Ω, 5A output 2.5VA
Installation: clamp type
Output mode: lead output
PARAMETERS
Electrical parametersMechanical parameters
PHOTO
The model P50 current transformer clamp is designed for fast and easy measure the current in industrial and power environment, it has wide range of current measurement.current clamp p50 price is cheaper than CA current clamp, low phase shift, high precision 0.1% and good quality!
S type and P type, Q type AC Current Clamp are designed to extend the current measuring capabilities of DMMs or BNC, power instruments, oscilloscopes, hand-held scopes, recorders or loggers, clamp type grounding resistance tester, double clamp phase angle meter, energy meter calibrator and other diverse instruments.
The current clamp is placed around the current-carrying conductor to perform non-contact current measurements without interrupting the circuit under test. The clamp outputs current or voltage signals directly proportional to the measured current, thereby providing current measuring and displaying capabilities to instruments with low current or voltage inputs.
FEATURES
Suitable for 1000A cable online measurement
Holding wire diameter: φ50mm
Dimension: 101mm×219mm×26mm
Load capacity: mA output≤4Ω, 1A output 0.1Ω, 5A output 2.5VA
Installation: clamp type
Output mode: lead output
PARAMETERS
Electrical parametersMechanical parameters
| Ratio | 1000: 1 or 2000:1 (customized) |
| Accuracy class | 0.1%, 0.2%, 0.5% |
| Primary current | 0 - 1000A AC |
| Secondary current | 0 - 5A AC (customized) |
| Max. Cont. Input current | 1200A |
| Over voltage category | CAT III 600V |
| Output signal | 500mA,1A,5A AC at nominal input current |
| Frequency range | 40Hz-2000Hz |
| Dielectric strength | 3KV 50Hz/60Hz at 1 minute |
| Temperature range | -20°C to +55°C |
| Output | 2.5 meter cable with D01 connector |
| Max. voltage not insulated conductors | 600 V |
| Standard | EN 61010-1, EN 61010-2-032, IEC60044-1 |
| Installation | Clamp type |
| Output mode | Lead output(2.5m) |
| Dimensions (L x W x H) (mm) | 102.9 x 219.6 x 28 |
| Weight (g) | 550 |
| Holding wire diameter (mm) | φ50 |
| Max. jaw opening (mm) | 50 |
| Jaw Color | Blue |
| Material | PC+ABS+Polycarbonate, UL94 V0 |
- Similar Products
$20.00
10 Pieces (MOQ)
High Precision AC Measuring Output Split Current Transformer
Hubei Tianrui Electronic Co., Ltd.
$12.00
10 Pieces (MOQ)
Wide Range 2 Times Rated Current Primary 200A
Hubei Tianrui Electronic Co., Ltd.