Swipe or use the arrows to view product images.
Hot Working Tool Steel, Mold Steel1.2344ESR/H13/4Cr5MoSiV1/8407/SKD61
| Price | $3100.00 |
|---|---|
| Min Order | 20 Tons |
| Availability | In Stock |
| Shipping From | Sichuan, China |
| Popularity | 540 people viewed |
Type:
Round, Flat, Block, Hollow Bar, Irregular Forging
Standard:
AISI, ASTM, DIN, JIS, GB, BS
Composition:
Alloy Steel
Technique:
Forged
Shape:
Round, Flat, Block, Hollow Bar, Irregular Forging
Surface Treatment:
Black/Milled/Turned/Polish
Special Use:
High-strength Steel Plate, Wear Resistant Steel, Mold Steel
Application:
Die Casting Molds,Extrusion Molds,Plastic Mold
Trademark:
ChangXiang special steel
Transport Package:
Nuded Package
Specification:
&Phi: 50-1000; 80-800*300-2000
Origin:
Jiangyou City, Sichuan Province
HS Code:
7228400000
Product Description
INTERNATIONAL STEEL GRADES
APPLICATION
1.2344ESR/H13/4Cr5MoSiV1/8407/SKD61 is used to manufacture forging dies, hot extrusion dies, and precision forging dies with high impact loads; Aluminum, copper and their alloy die-casting molds.
Eg :
Die casting molds, such as die cores, inserts, thimbles, and sleeves
Extrusion molds, such as mold cores, mold pads, and liners
Hot pressing mold for aluminum,copper,magnesium
Plastic mold,such as auto lamp mould
Cold punching, trimming, hot shearing, tightening rings, and wear-resistant components
CHARACTERISTICS
Electroslag remelting steel, which has high hardenability and resistance to hot cracking, contains a high content of carbon and vanadium, has good wear resistance, relatively weakened toughness, and good heat resistance. It has good strength and hardness at higher temperatures, high wear resistance toughness, excellent comprehensive mechanical properties, and high tempering stability.
TEHNICAL INDEXC
1.In strict conformity with chemical composition(W.t%):
The allowable deviation of the chemical composition of finished steel products should comply with the provisions of GB/T222-2006.
2.Smelting process
EAF+LF+VD+ESR
3.Production process
Hot forging+Spheroidization annealing & EFS
4.Delivery hardness
≤235HB
5.Forging ratio
≥6:1
6.Grain size
According to ASTM E112 standard, the qualification level is evaluated as ≥ 7.
7.Delivery length
Delivered at 2.0-5.8 meters.
8.Surface state
Rough turning,Remove the top needle hole;Sawing at both ends(Cold cutting);Flat.
9.Dimensional tolerance
Φ0/+3mm.
10.Testing requirements
100% piece by piece inspection according to SEP 1921-84 3 D/d level to ensure qualified inspection.
11.Quality Assurance Certificate
Provide original factory warranty certificate.
12.Spray recognition requirements
Spray painting according to customer requirements;
One end of the product is sprayed with the following content:Steel grade,Specifications,Weight,Oven number and CHANGXIANG.
| ISO | DIN | ASTM/ANSI | JIS | GB |
| X40CrMoV5-1 | DIN1.2344 | H13 | SKD61 | 4Cr5MoSiV1 |
APPLICATION
1.2344ESR/H13/4Cr5MoSiV1/8407/SKD61 is used to manufacture forging dies, hot extrusion dies, and precision forging dies with high impact loads; Aluminum, copper and their alloy die-casting molds.
Eg :
Die casting molds, such as die cores, inserts, thimbles, and sleeves
Extrusion molds, such as mold cores, mold pads, and liners
Hot pressing mold for aluminum,copper,magnesium
Plastic mold,such as auto lamp mould
Cold punching, trimming, hot shearing, tightening rings, and wear-resistant components
CHARACTERISTICS
Electroslag remelting steel, which has high hardenability and resistance to hot cracking, contains a high content of carbon and vanadium, has good wear resistance, relatively weakened toughness, and good heat resistance. It has good strength and hardness at higher temperatures, high wear resistance toughness, excellent comprehensive mechanical properties, and high tempering stability.
TEHNICAL INDEXC
1.In strict conformity with chemical composition(W.t%):
| element | C | Si | Mn | P | S | Cr | Mo | V |
| standard | 0.37/ 0.42 | 0.90/ 1.20 | 0.30/ 0.50 | ≤ 0.030 | ≤ 0.030 | 4.80/ 5.50 | 1.20/ 1.50 | 0.90/ 1.10 |
2.Smelting process
EAF+LF+VD+ESR
3.Production process
Hot forging+Spheroidization annealing & EFS
4.Delivery hardness
≤235HB
5.Forging ratio
≥6:1
6.Grain size
According to ASTM E112 standard, the qualification level is evaluated as ≥ 7.
7.Delivery length
Delivered at 2.0-5.8 meters.
8.Surface state
Rough turning,Remove the top needle hole;Sawing at both ends(Cold cutting);Flat.
9.Dimensional tolerance
Φ0/+3mm.
10.Testing requirements
100% piece by piece inspection according to SEP 1921-84 3 D/d level to ensure qualified inspection.
11.Quality Assurance Certificate
Provide original factory warranty certificate.
12.Spray recognition requirements
Spray painting according to customer requirements;
One end of the product is sprayed with the following content:Steel grade,Specifications,Weight,Oven number and CHANGXIANG.
- Similar Products