Swipe or use the arrows to view product images.
Huading CL Types Drum Gear Coupling for Metallurgy, Mining
| Price | $2000.00 |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Jiangsu, China |
| Popularity | 317 people viewed |
Model NO.:
CL
Standard Or Nonstandard:
Nonstandard
Shaft Hole:
as Your Requirement
Torque:
as Your Requirement
Bore Diameter:
as Your Requirement
Speed:
as Your Requirement
Structure:
Rigid
Material:
42CrMo
Type:
Rigid Coupling
Delivery Time:
20-45day
Terms of Shipment:
by Sea
Color:
Customer Required
Trademark:
Huading
Transport Package:
Wooden Case
Specification:
as your requirement
Origin:
Jingjiang, Jiangsu Province
HS Code:
8483600
Product Description
CL Drum Gear Coupling
Huading CL-type gear coupling is suitable for connecting two horizontal axes transmission shafting. It has the capability of compensating relative deviation of two axes and belongs to movable rigid coupling. Two outer shells with inner teeth and two sleeves with outer teeth are composed. The sleeves and shafts are connected by keys. The two outer shells are connected by bolts. A sealing ring is arranged between the shell and sleeve.
♦Features
1. Tooth coupling has a small radial dimension and large load-carrying capacity. It is often used for shafting transmission under low-speed and heavy-load conditions. Tooth coupling with high accuracy and dynamic balance can be used for high-speed transmission.
2. It has the ability to compensate for the deviation of radial, axial and angular equiaxed.
3. It has a compact structure, small turning radius, large bearing capacity, high transmission efficiency, low noise, and a maintenance cycle.
♦CL Gear Coupling Main Dimension And Parameter
| Model | Nominal Torque KN·m | Speed rpm | Bore d1,d2,dz | Length of Bore | A | B | D | D1 | D2 | C | C1 | C2 | e | Rotary Inertia kg·m | Mass kg | |
| Y | J1 Z2 | |||||||||||||||
| L | ||||||||||||||||
| mm | ||||||||||||||||
| CL1 | 710 | 3780 | 18,19 | 42 | 30 | 49 | 106 | 170 | 110 | 55 | 16 | - | - | 12 | 0.03 | 7.8 |
| 20,22,24 | 52 | 38 | 6 | 18.5 | 18.5 | |||||||||||
| 25,28 | 62 | 44 | 2.5 | 14 | 18.5 | |||||||||||
| 30,32,35,38 | 82 | 60 | 11 | - | ||||||||||||
| 40 | 112 | 84 | ||||||||||||||
| CL2 | 1400 | 3000 | 30,32,35,38 | 82 | 60 | 75 | 134 | 185 | 125 | 70 | 2.5 | 13 | 22 | 12 | 0.05 | 12.5 |
| 40,42,45 | 112 | 84 | 28 | |||||||||||||
| 48,50 | ||||||||||||||||
| CL3 | 3150 | 2400 | 40,42,45 | 112 | 84 | 92 | 170 | 220 | 150 | 90 | 2.5 | 15 | 28 | 18 | 0.13 | 26.9 |
| 48,50,55,56 | ||||||||||||||||
| 60 | 142 | 107 | 36 | |||||||||||||
| CL5 | 8000 | 1680 | 50,55,56 | 112 | 84 | 145 | 220 | 290 | 200 | 130 | 5 | 30 | 40 | 25 | 0.45 | 55.8 |
| 60,63,65,70 | 142 | 107 | ||||||||||||||
| 71,75 | ||||||||||||||||
| 80,85,90 | 172 | 132 | ||||||||||||||
| CL6 | 11200 | 1500 | 60,63,65 | 142 | 107 | 160 | 246 | 320 | 230 | 140 | 5 | 25 | - | 25 | 0.70 | 79.9 |
| 70,71,75 | ||||||||||||||||
| 80,85,90,95 | 172 | 132 | ||||||||||||||
| 100,110 | 212 | 167 | ||||||||||||||
| CL7 | 18000 | 1270 | 65,70,71,75 | 142 | 107 | 185 | 286 | 350 | 260 | 170 | 5 | 40 | 40 | 30 | 1.15 | 109.5 |
| 80,85,90,95 | 172 | 132 | 25 | 45 | ||||||||||||
| 100,110,120 | 212 | 167 | ||||||||||||||
| CL8 | 22400 | 1140 | 80,85,90,95 | 172 | 132 | 210 | 325 | 380 | 315 | 190 | 5 | 35 | 45 | 30 | 2.38 | 133.8 |
| 100,110,120 | 212 | 167 | ||||||||||||||
| 130,140 | 252 | 202 | 30 | |||||||||||||
| CL9 | 28000 | 1000 | 90,95 | 172 | 132 | 220 | 335 | 430 | 365 | 210 | 5 | 40 | - | 30 | 3.55 | 171 |
| 100,110,120,125 | 212 | 167 | 30 | |||||||||||||
| 130,140,150 | 252 | 202 | ||||||||||||||
| 160 | 302 | 242 | ||||||||||||||
| CL10 | 50000 | 850 | 110,120,125 | 212 | 167 | 245 | 365 | 490 | 420 | 260 | 5 | 30 | - | 30 | 7.00 | 275.8 |
| 130,140,150 | 252 | 202 | ||||||||||||||
| 160,170,180 | 302 | 242 | ||||||||||||||
| CL11 | 71000 | 750 | 120,125 | 212 | 167 | 280 | 405 | 545 | 470 | 330 | 5 | 40 | - | 35 | 13.75 | 385 |
| 130,140,150 | 252 | 202 | ||||||||||||||
| 160,170,180 | 302 | 242 | 35 | |||||||||||||
| 190,200,220 | 352 | 282 | ||||||||||||||
| CL12 | 100000 | 660 | 140,150 | 252 | 202 | 350 | 485 | 590 | 520 | 340 | 5 | 45 | - | 35 | 21.5 | 540 |
| 160,170,180 | 302 | 242 | 38 | |||||||||||||
| 190,200,220 | 352 | 282 | ||||||||||||||
| 240,250 | 410 | 330 | ||||||||||||||
| CL13 | 140000 | 600 | 160,170,180 | 302 | 242 | 375 | 524 | 680 | 590 | 380 | 7.5 | 45 | - | 40 | 40.00 | 798.3 |
| 190,200,220 | 352 | 282 | ||||||||||||||
| 240,250,260 | 410 | 330 | ||||||||||||||
| 280 | 470 | 380 | ||||||||||||||
| CL14 | 200000 | 540 | 180 | 302 | 242 | 405 | 565 | 730 | 650 | 450 | 7.5 | 50 | - | 40 | 53.75 | 976.6 |
| 190,200,220 | 352 | 282 | ||||||||||||||
| 240,250,260 | 410 | 330 | ||||||||||||||
| 280,300,320 | 470 | 380 | ||||||||||||||
| CL15 | 250000 | 480 | 200,220 | 352 | 282 | 480 | 644 | 780 | 700 | 480 | 7.5 | 50 | - | 40 | 81.25 | 1182.5 |
| 240,250,260 | 410 | 300 | ||||||||||||||
| 280,300,320 | 470 | 380 | ||||||||||||||
| 340,360 | 550 | 450 | ||||||||||||||
| CL16 | 355000 | 425 | 240,250,260 | 410 | 330 | 535 | 720 | 900 | 785 | 530 | 10 | - | - | 50 | 150 | 1936 |
| 280,300,320 | 470 | 380 | ||||||||||||||
| 340,360,380 | 550 | 450 | ||||||||||||||
| 400 | 650 | 540 | ||||||||||||||
| CL17 | 560000 | 380 | 260 | 410 | 330 | 625 | 800 | 1000 | 885 | 630 | 10 | - | - | 50 | 285 | 2700 |
| 280,300,320 | 470 | 380 | ||||||||||||||
| 340,360,380 | 550 | 450 | ||||||||||||||
| 400,420,440,450 | 650 | 540 | ||||||||||||||
| CL18 | 710000 | 330 | 300,320 | 470 | 380 | 71 | 900 | 1100 | 990 | 710 | 10 | - | - | 50 | 400 | 3669 |
| 340,360,380 | 550 | 450 | ||||||||||||||
| 400,420,440,450 | 650 | 540 | ||||||||||||||
| 460,480,500 | ||||||||||||||||
| CL19 | 1000000 | 300 | 360,380 | 550 | 450 | 730 | 910 | 1250 | 1090 | 800 | 15 | - | - | 60 | 675 | 5138 |
| 400,420,440,450 | 650 | 540 | ||||||||||||||
| 460,480,500 | 800 | 680 | ||||||||||||||
| 530,560 | ||||||||||||||||
Note:
1. The coupling mass and rotary inertia are approximations calculated by the minimum diameter and the maximum length of the bore.
2. Bore diameter dz <140mm.
3. J1-type bore does not need shaft end baffle as required.
4. This standard applies only to old products.
1. The coupling mass and rotary inertia are approximations calculated by the minimum diameter and the maximum length of the bore.
2. Bore diameter dz <140mm.
3. J1-type bore does not need shaft end baffle as required.
4. This standard applies only to old products.
Jingjiang Huading Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the design and manufacture of various types of coupling. There are 86 employees in our company, including two senior engineers and no fewer than 20 mechanical design and manufacture, heat treatment, welding, and other professionals.
Advanced and reasonable process, complete detection means. Our company actively introduces foreign advanced technology and equipment, on the basis of the condition, we make full use of the advantage and do more research and innovation. Strict to high quality and operate strictly in accordance with the ISO9000 quality certification system standard mode.
Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective.
Advanced and reasonable process, complete detection means. Our company actively introduces foreign advanced technology and equipment, on the basis of the condition, we make full use of the advantage and do more research and innovation. Strict to high quality and operate strictly in accordance with the ISO9000 quality certification system standard mode.
Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective.
1. Design Services
2. Product Services
raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping
3. Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your need.
4. Research & Development
We usually research the new needs of the market and develop new models when there are new cars in the market.
5. Quality Control
Every step should be a particular test by Professional Staff according to the standard of ISO9001 and TS16949.
Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturingvarious series of couplings.
Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all customers with customized PDF or AI format artwork.
Q 3:How long is your delivery time?
Generally, it is 20-30 days if the goods are not in stock. It is according to quantity.
Q 4: Do you provide samples? Is it free or extra?
Yes, we could offer the sample but not for free. Actually, we have an excellent price principle, when you make the bulk order the cost of the sample will be deducted.
Q 5: How long is your warranty?
A: Our Warranty is 12 months under normal circumstances.
Q 6: What is the MOQ?
A: Usually our MOQ is 1pcs.
Q 7: Do you have inspection procedures for coupling?
A:100% self-inspection before packing.
Q 8: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory.
Q 9: What's your payment?
A:1) T/T.
- Similar Products