Swipe or use the arrows to view product images.
Original 9620-16I Broadcom Tri-Mode Pcie 4.0 Storage Adapter Card Port Adapters Ehbas
| Price | $482.00 |
|---|---|
| Min Order | 2 pieces |
| Availability | In Stock |
| Shipping From | Jiangsu, China |
| Popularity | 442 people viewed |
Model NO.:
9620-16i
Communication Mode:
Full-Duplex & Half-Duplex
Type:
Controllers
Transmission Rate:
12GB/S
Ports:
≦8
Trademark:
Broadcom
Transport Package:
Carton Packing
Origin:
Malaysia
Product Description
Applications
• High-port, direct-attached SAS/
SATA/NVMe high-connectivity
applications
• Flexible solutions for cloud
computing
• Server and external storage
applications
Key Features
• 3rd-Generation Tri-Mode Storage
Interface
• 22.5, 12, and 6Gb/s SAS and
6Gb/s SATA data transfer rates
• x16 and x8 PCIe Gen 4.0 Host
Interface
• Hardware Secure Boot and
Attestation
• Universal Backplane Management
(UBM) ready (SFF-TA-1005)
• Unified Drivers and Utilities
Performance
• MegaRAID:
− 6M to 6.4M IOPS (4K RR - JBOD)
− 4.5M to 6.4M RAID O/1 IOPS
(4K RR)
− 900K to 1.1M RAID 5 IOPS
(4K RW)
• eHBAs: 6M to 6.4M IOPS (4K RR)
• High-port, direct-attached SAS/
SATA/NVMe high-connectivity
applications
• Flexible solutions for cloud
computing
• Server and external storage
applications
Key Features
• 3rd-Generation Tri-Mode Storage
Interface
• 22.5, 12, and 6Gb/s SAS and
6Gb/s SATA data transfer rates
• x16 and x8 PCIe Gen 4.0 Host
Interface
• Hardware Secure Boot and
Attestation
• Universal Backplane Management
(UBM) ready (SFF-TA-1005)
• Unified Drivers and Utilities
Performance
• MegaRAID:
− 6M to 6.4M IOPS (4K RR - JBOD)
− 4.5M to 6.4M RAID O/1 IOPS
(4K RR)
− 900K to 1.1M RAID 5 IOPS
(4K RW)
• eHBAs: 6M to 6.4M IOPS (4K RR)
| Product Name | Controllers |
| Warranty | 1 Years |
| Storage Temp / Humidity | -40 to 85ºC |
| Products Status | Brand-new |
| Output | 12-36V |
| 1. Unpack the HBA, and inspect it for damage. | Remove the HBA from the antistatic bag, and carefully inspect the device for damage. If you notice any damage, contact LSI or your reseller support representative. |
| 2. Prepare the computer. | Turn off the computer, and disconnect the power cord from the rear of the power supply. |
| 3. Remove the cover from the chassis. | |
| 4. Check the mounting bracket on the HBA (system-dependent). | If required for your system, replace the full-height mounting bracket that ships on the HBA with the low-profile bracket supplied. Complete step a through step d to attach the short bracket. |
| 5. Insert the HBA into an available PCIe® slot. | Locate an empty x8 PCIe slot. Remove the blank bracket panel on the rear of the computer that aligns with the empty PCIe slot. Save this bracket screw, if applicable. Align the HBA to a PCIe slot. Press down gently, but firmly, to seat the HBA correctly in the slot. The following figure shows how to insert the HBA into a PCIe slot. |
- Similar Products