Swipe or use the arrows to view product images.
Tpae Sports Nylon Resin Equipment Rubber Elastomer Nylon PA12
| Price | $14.00 |
|---|---|
| Min Order | 1000 kg |
| Availability | In Stock |
| Shipping From | Shandong, China |
| Popularity | 470 people viewed |
Model NO.:
EN401
CAS No.:
63428-83-1
Molecular Principal Chain:
Heterochain Polymer
Color:
White
Type:
Polyamide PA Nylon Granules
Material:
100% Nylon
Grade:
Injection Grade
Application:
Shoes Material
Item:
Nylon Raw Material
Usage:
Injection, General Plastics, Engineering Plastics
Supply Ability:
800 Metric Tons Per Month
Certificates:
SGS
Physical Properties:
High Chemical Resistance High Mechanical Strength
Features:
Good Oil Resistance Good Impact Toughness
Trademark:
No Mark
Transport Package:
International Standard Package
Specification:
20kg/foil bag, 1000kg/carton box
Origin:
Shandong, China
HS Code:
3908101900
Product Description
Nylon Elastomer
Nylon elastomer is TPAE, TPAE inclued PEBA,PEEA,PEA according to the monomer.
The nylon Elastomer, high impact strength, Shore D63. even at -50ºC lowtemperatures, It can be used for molding injection, extruding and compoundpolymer. It could maintain good performance at very wide rangetermperature.
Best Price Virgin Polyamide PA12 Granular Nylon Elastomer for Injection Molded Sports Shoes
Typical Characteristics:
• Good and consistent behavior at cold temperature
• No mechanical property loss during repeated solicitation and resistance to fatigue (low hysteresis, high energy transfer and no heat build up)
• Excellent spring back and elasticity return
• Accurate dimension stability
• The Lightest Thermoplastic Elatomers PA12 Elastomer
| TYPICAL PROPERTIES TYPE of Shore D63 | |||
| Charpy Notch Impact | KJ/m2 | ISO179 | 25JNB |
| Charpy Non-Notch Impact | KJ/m2 | ISO179 | 25JNB |
| Tensile Strength | MPa | ISO527 | 28 |
| Elongation At Break | % | ISO527 | 310 |
| Flexural Strength | MPa | ISO178 | 10 |
| Flexural Module | MPa | ISO178 | 228 |
| Density | g/cm3 | ISO1183 | 1.03 |
| Water Content | % | <0.2 | 0.15 |
| Hardness shore | Shore D | ISO868 | 63 |
| Melt Point | ºC | GB 4608-84 | 182 -186 |
- Similar Products