White Interior Paint Concrete Wall Acrylic Polyurethane Topcoat/Smooth Film/Water Resistance

1. Interior steel component;
2. Interior steel products;
3. Indoor instrumentation and other workpieces, etc.

1. Air drying;
2. Uniform and beautiful color;
3. Strong adhesion;
4. Good resistance to water and oil;
5. Excellent physical and chemical properties.

A variety of regular colors, but not white.

· Surface Treatment
  1. Steel sandblasting to Sa2.5 level, or manual rust removal St3 level, rough surface 40-70μm, keep the substrate surface clean and dry.
  2. After reaching the above rust removal standards, the primer coating should be completed within 4h. Surfaces that fail to be primed in time should be resurfaced.

· Humidity & Temperature
  The substrate temperature is 0 to 50 ° C, and must be 3 ° C above the dew point, and the relative humidity is not greater than 85%.

1. Proper ventilation of the construction site;
2. Fireworks are strictly prohibited in the construction site and adjacent areas;
3. Use explosion-proof electrical equipment;
4. Metal impact is strictly prohibited;
5. Prevent static accumulation;
6. Wear necessary protective equipment;
7. Avoid inhaling paint mist, avoid skin contact with paint and thinner, etc;
8. If the eyes are accidentally splashed with paint, wash with plenty of water and seek medical attention;
9. Properly dispose of empty paint drums and remaining paint to avoid environmental pollution;
10. Take all other necessary safety and fire control measures according to the specific situation on the scene.