Audited Supplier
QC-16
Banner
Polyester
Roll
Customized
Aluminium
Dye-Sublimation Printing
Fire-Proof
100% Polyester
Sublimation/Heat Transfer Printing
Lightweight
Advertising Flag Banner
2000m
Hard Tube Carton
YS
Kraft Paper
320cm
China
6006310000
Product Description
Inkjet Printable Fabric Material
Our uncoated polyester fabrics are ideal for Dye Sublimation printing. We offer a variety of knits
and wovens up to 126 inches wide and most meet NFPA 701 flame requirements. These fabrics
are prepared for dye sublimation print or heat transfer.
| Backlit/Frame Display Fabric (Direct Printing,Paper Transfer,UV and Latex printable) | |
|---|---|
| Max. Width - 126" |
|
| Weight - 8.5 oz/yd2 (290 g/m2) | |
| Construction - Woven Filament | |
| FR - If Requested | |
| Suggested Applications - Awnings, Banners, Light Box Signage | |
Description-This fabric 100% Polyester and is bright white and very sturdy. It an excellent awning fabric and a less expensive alternative to Light Box Signage.It has been tested for several water proof tests including Impact Penetration,AATCC 42-2007: 0.0 grams of weight gain;Water Repellency,AATCC 70-2010:29.19% water absorbed;Water Repellency,AATCC 22-2010 (Spray):100 -No sticking or wetting. | |
| Mesh Falg Fabric (Direct Printing,Paper Transfer,UV and Latex printable) | |
|---|---|
| Max. Width - 126" |
|
| Weight - 3.0 oz/yd2 (115 g/m2) | |
| Construction - Woven 150D | |
| FR - If Requested | |
| Suggested Applications - Barrier Fencing, Construction Barriers, Flags,Temporary Eventing Fencing, Sports Marketing | |
| Description - This fencing fabric is 100% Polyester. This thin, open fabric was created specifically for short-term construction barriers, eventing and sports marketing markets. Small holes in the fabric allow for some see through and there is adequate space for printed colors and images. It has an open area of 15-20%. | |
| Polyester knitted wrap fabric (Direct Printing,Paper Transfer,UV and Latex printable) | |
|---|---|
| Max. Width - 126" |
|
| Weight - 3.0~7.5 oz/yd2 (105~260 g/m2) | |
| Construction - Knitted 150D | |
| FR - If Requested | |
| Suggested Applications - Banners - Outdoor Street Pole, Flags | |
| Description - The fabric is 100% Polyester. This product has excellent durability and is one of the most versatile in our line of printing fabrics.Combined with UV resistant inks, it makes an excellent outdoor banner fabric. | |
| Oxford Fabric (Direct Printing,Paper Transfer,UV and Latex printable) | |
|---|---|
| Max. Width - 126" |
|
| Weight - 7.5 oz/yd2 (252 g/m2) | |
| Construction - Brushed Tricot 3 bar | |
| FR - NFPA 701 | |
| Suggested Applications - Gaming Tables, Home Furnishings,Upholstery | |
Description - Oxford fabric is 100% Polyester.Developed as a top cover for gaming tables, it has the width requirements for roulette and craps tables.It has great stability in all directions and is wrinkle resistant. | |
| Blocker fabric - (Direct Printing,Paper Transfer,UV and Latex) | |
|---|---|
| Max. Width - 126" | |
| Weight - 7.5 oz/yd2 (250 g/m2) | |
| Construction - Square Weave | |
| FR - If Requested | |
| Suggested Applications - Banners - Indoor, Opaque/Blockout Liner,Photographic Back Drops, Projection Screens | |
| Description - 1800 Blocker is 65% Polyester, 35% Cotton. It has an acrylic coating to enhance the brilliance of the colors when printed digitally in a double strike mode. It is also an excellent block out liner. | |
| Reclaim Heavy Knit - (Direct Printing,Paper Transfer,UV and Latex printable) | |
|---|---|
| Max. Width - 126" | |
| Weight - 7.5 oz/yd2 (252 g/m2) | |
| Construction - Warp Knit 2 bar 100d, 150d | |
| FR - NFPA 701 | |
| Suggested Applications - Banners - Indoor, Exhibit Graphics, Home Furnishings, Photographic Back Drops, Retail Displays, Roll Up Banner Stands, Silicone Edge Graphics | |
| Description - Reclaim Heavy Knit is comprised of 100% REPREVE Recycled yarn and 100% Post Consumer Waste. ET 9373's REPREVE certification number is RPV-1847. This fabric is wrinkle resistant and moderately opaque. | |
| Reclaim Open Knit - (Direct Printing,Paper Transfer,UV and Latex printable) | |
|---|---|
| Max.Width - 126" | |
| Weight - 6.0 oz/yd2 (202 g/m2) | |
| Construction - Warp Knit | |
| FR - NFPA 701 | |
| Suggested Applications - Banners - Indoor, Banners - Outdoor Street Pole, Exhibit Graphics, Retail Displays | |
| Description - Reclaim Open Knit is comprised of 100% REPREVE Recycled yarn and 100% Post Consumer Waste. ET 9374's REPREVE certification number is RPV-1848. This fabric has the hand, look and feel of a woven fabric but the wrinkle resistant characteristics of a knit. | |
| Frame Display Fabric - (Direct Printing,Paper Transfer,UV and Latex printable) | |
|---|---|
| Max. Width - 126" | |
| Weight - 8.6 oz/yd2 (290 g/m2) | |
| Construction - Simplex Knit | |
| FR - NFPA 701 | |
| Suggested Applications - Exhibit Graphics, Geometric/Stretch Displays,Home Furnishings, Photographic Back Drops,Silicone Edge Graphics, Tension Displays | |
| Description - This fabric is 100% Polyester.It is totally wrinkle free and has stretch in both directions. It gives a decent amount of opacity and great definition on all colors. | |
| Backlit Poplin Fabric - (Direct Printing,Paper Transfer,UV and Latex printable) | |
|---|---|
| Width - 122" | |
| Weight - 7.5 oz/yd2 (252 g/m2) | |
| Construction - Woven Texturized Yarn | |
| FR - NFPA 701, Title 19, E84, CSFM F-58601 | |
| Suggested Applications - Architectural, Backlit, Double Sided Banners, Light Blocking Liner,Silicone Edge Graphics | |
| Description - Backlit Poplin Fabric is 100% Polyester made with 76% FR yarn.It is a three layer fabric with tightly woven yarns that make it an excellent light box fabric.It is extremely wrinkle resistant. It has been tested for ASTM E 84: Meets Class A, Flame Spread Index 25 or less and Smoke Developed Index 450 or less. | |
| Blockout Fabric - (Direct Printing,Paper Transfer,UV and Latex both sides printable) | |
|---|---|
| Max. Width - 126" | |
| Weight - 7.5 oz/yd2 (250 g/m2) | |
| Construction - Three Layered Woven | |
| FR - NFPA 701, Title 19, E84, CSFM F-91301 | |
| Suggested Applications - Architectural, Double Sided Banners,Light Blocking Liner,Silicone Edge Graphics | |
| Description - This fabric is 100% Polyester.It is a three layer fabric with a layer of black fabric in the middle, making it almost completely opaque and allowing for double sided printing.Under ASTM E84 it meets Class A, Flame Spread Index 25 or less and Smoke Developed Index 450 or less. | |
