Audited Supplier
A series of ceramic fiber folded module was processed according the fiber module structure.size by special machine on the ceramic fiber needle blanket which was corresponding material. In the course of processing, they should be maintained a certain proportional reduction, to ensure that compressed to form a integer set without joint between ceramic fiber folded blanket after ceramic fiber folded module have been built. Owing to the ceramic fiber folded module expand differently. Ceramic fiber folded module could be fixed to the stud which in the steel board of industrial furnace by series of anchors.
- 1260 ceramic fiber folded module RDGW-289
- 1260 ceramic fiber folded module RDGW-389
- 1400 ceramic fiber folded module RDGW-489
- 1430 ceramic fiber folded module RDGW-589
| Name | Ceramic Fiber Module | ||||||||
| Classification temperature | 1260 | 1400 | 1430 | ||||||
| Code | RDGW-289 | RDGW-389 | RDGW-489 | RDGW-589 | |||||
| Shrinkage on heating (%) | 1000ºC×24h≤-3 | 1100ºC×24h≤-3 | 1200ºC×24h≤-3 | 1350ºC×24h≤-3 | |||||
| Theoretical density (kg/m3) | 200±10;220±10 | ||||||||
| Shot content(φ≥0.25mm)(%) | ≤15 | ||||||||
| Theoretical Thermal Conductivity (W/m·k) | (mean200ºC) | 0.050-0.060 | |||||||
| (mean400ºC) | 0.095-0.120 | ||||||||
| (mean600ºC) | 0.160-0.195 | ||||||||
| Chemical composition (%) | Al2O3(%) | ≥45 | ≥45 | 52-55 | - | ||||
| Fe2O3(%) | ≤1.0 | ≤0.2 | ≤0.2 | ≤0.2 | |||||
| ZrO2(%) | - | - | - | 15-17 | |||||
| Al2O3+SiO2+ ZrO2(%) | - | - | - | ≥99 | |||||
| Al2O3+SiO2(%) | ≥97 | ≥99 | ≥99 | - | |||||
| K2O+Na2O(%) | ≤0.5 | ≤0.2 | ≤0.2 | ≤0.2 | |||||
| Regular Specification (mm) | 300×300×250 | ||||||||
| Package | Carton | ||||||||
| Quality and Environmental System Certificate | ISO9001-2000 ISO14001-1996 | ||||||||
| Characteristic | Excellent chemical stability The application of ceramic fiber module is not only in the kiln, but also brings the following benefits to the end user: The various forms of anchors at the back of the module allow the module to be installed in either parallel or parquet floor arrangement. The folded blanket will squeeze each other in different directions after unbundling, without creating gaps. Elastic fiber blanket can resist mechanical forces. The elasticity of the fiber blanket can compensate for the deformation of the furnace shell, so that there is no gap between the components. Due to its light weight, it has little heat absorption when used as a thermal insulation material. Low thermal conductivity brings high energy saving effect. Has the ability to resist any thermal shock. The liner does not need drying and maintenance, and can be put into use immediately after installation. The anchoring system is far away from the hot surface of the component, so that the metal anchoring is at a relatively low temperature, improving the safety of anchoring. |
| Application | Furnace lining for industrial furnaces and heating devices in metallurgical industry. Machinery industry Industrial furnace, heating device furnace lining. Building materials industry industrial furnace furnace, heating device lining. Linings for industrial furnaces and heating devices in petrochemical industry. Non-ferrous metal industry industrial furnace furnace, heating device lining. |
Q1 : What's the MOQ. Can I get a sample of free?
A1: MOQ, according to the actual situation. We can offer a sample of free. Please, friendly bear the shipping cost.
Q2 : When can i get the quotation?
A2: We can give you reply with quotation quickly if you kindly send the inquiry with following factors: working temperature, maximum working temperature, bulk density, dimension (length*width*thickness), and quantity.
Q3 :What's the MOQ of trial order?
A3: No limit, we can offer the best suggestions and solutions according to your condition
Q4 : What is the HS code?
A4: The HS code is 68061010.
Welcome your inquiry and expect to provide satisfactory products and services for you.
