Audited Supplier
MS-1317
75009-88-0
Structural Adhesive
Paste
Construction, Woodworking, Rock Slab Splicing
Silicone
Room Curing
Polymerization of Amines and Polyisocyanates
Weatherability
Tackifier
Organic Material
White
Ab Components
Moisture Curing
White/Grey/Black
Fast Curing,Strong Adhesion
Formaldehyde-Free
Wear-Resistant and Scratch-Resistant
Resistant to Yellowing and High Temperature
AEP
Carton
280ml/300ml/310ml/590ml/600ml
Xiamen, China
3214109000
Product Description
About Product:
Made from polymerization of amines and polyisocyanates, AB component, specially used for the splicing of quartz countertops, artificial stone special-shaped, natural stone countertops, etc.
The main purpose:
It is used in the production and processing of slate, artificial stone, quartz stone, etc., such as: bonding, 45° splicing, gap splicing, seamless splicing, yin and yang angle splicing, etc. of slate countertops such as sinks, bathrooms, cabinets, etc.
Made from polymerization of amines and polyisocyanates, AB component, specially used for the splicing of quartz countertops, artificial stone special-shaped, natural stone countertops, etc.
The main purpose:
It is used in the production and processing of slate, artificial stone, quartz stone, etc., such as: bonding, 45° splicing, gap splicing, seamless splicing, yin and yang angle splicing, etc. of slate countertops such as sinks, bathrooms, cabinets, etc.
| MS Caulking Adhesive - TDS Forms | ||||||||||
| Test items | Technical indicators | Note | ||||||||
| Appearances | Colors | Black/White/Grey | Colours can be customised | |||||||
| State | Delicate cream | Visual assessment | ||||||||
| Density | g/cm³ | 1.4±0.1 | GB/T14683.2 | |||||||
| Extrusion rate | ml/min | ≥450ml/min | GB/T 13477.3 | |||||||
| Shifting | vertical sag | ≤1mm | GB/T 13477.6 | |||||||
| Curing speed | Surface drying time | 40~100min | GB/T 13477.6 | |||||||
| Initial 24 hour cure depth | ≥2mm | |||||||||
| Hardness | Shore A | 50±5A | GB/T531-2008 | |||||||
| Tensile Stress Strain | Tensile strength(TS) | ≥0.75Mpa | GB/T14683.8 | |||||||
| 100% Tensile strength(M100) | About 0.30 Mpa | |||||||||
| Elongation at break EB (%) | ≥400% | |||||||||
| Elastic recovery rate | According to the 25LM class | ≥75% | GB/T13477.17 | |||||||
| Constant elongation bonding | Substrate: Concrete mortarboard | Non-destructive | GB/T 13477.10 | |||||||
| Adhesion after cold pulling and hot pressing | Substrate: Concrete mortarboard | Non-destructive | GB/T 13477.13 | |||||||
| Elongation bonding after immersion in water | Substrate: Concrete mortarboard | Non-destructive | GB/T 13477.14 | |||||||
| Curing Shrinkage | Quality loss rate | ≤3% | GB/T 13477.19 | |||||||
Instructions for use
1.Before construction, the grass-roots level will be cleaned up, no dust, oil and other substances that affect the bonding strength.
2.This product can be used for spot gluing, the spot gluing area should be not less than 10% of the pasted area; you can also use the following 4mm tooth-shaped trowel to pull the teeth of the full scraping and paving, after the completion of the adhesive layer thickness of up to 3mm is good.
3.Adjustment should be completed within ten minutes after dispensing.
4.The product room temperature curing, surface drying time: 45Min, full curing time: 72h.
5.Application temperature range: -40ºC-+100ºC.
Precautions
1.Prohibit contact with water, steam, alcohol solvents (such as alcohol).
2.Construction temperature of 5-32 ºC is preferred.
3.We should wear gloves, masks, etc. for protection when using to prevent allergic reactions.
4.in order to prevent the liquid into the eyes caused by allergies, you can wear an eye mask when dispensing.
5.After construction, it is advisable to wash hands before drinking or eating to avoid ingesting glue components.
6.The product should be stored in a ventilated, dry, cool place, prevent direct sunlight, storage temperature 8-28 ºC.
Features:
1.Fast curing
2.Strong adhesion,formaldehyde-free
3.High strength, no cracking
4.Resistant to yellowing and high temperature
5.Waterproof and mildew proof
6.Fireproof, zero water absorption
7.Wear-resistant and scratch-resistant
1.Fast curing
2.Strong adhesion,formaldehyde-free
3.High strength, no cracking
4.Resistant to yellowing and high temperature
5.Waterproof and mildew proof
6.Fireproof, zero water absorption
7.Wear-resistant and scratch-resistant
The company takes customer as the centre, quality as the fundamental, innovation as the vitality, and is committed to developing into an adhesive enterprise trusted by customers. We have won the honours of National High-tech Enterprise, Xiamen High-tech Enterprise, Growing Enterprise, Speciality and New Enterprise, Intellectual Property Demonstration Enterprise, New Material Enterprise, and Demonstration Enterprise of Scientific and Technological Project Products.
Q1.:Can I get the Adhesive samples?A1.:Sure,We can provide you free samples.
Q2.:How to find the most suitable product for me?
A2.:Please tell us about the use or application of the adhesive you are purchasing, and we will recommend the right adhesive for you.
Q3.:Can you provide OEM service?
A3.:Yes, we can provide you with OEM service to customise your own branding and outer packaging.
Q4.:What is your delivery time?
A4.:For OEM order,delivery in 20-30 days.
Q5.:What is your terms of payment?
A5.:30% deposit in advance,70% paid in before shipment.
Q6.:What is the shelf life of your product?
A6.:12 months.
