Audited Supplier
PK-32*1.98M
1 Year After The Final Acceptance
Pusher Kiln
Firing Machine
ISO9001:2015
Automatic
Customized
PLC
Zhongya kiln
Pallet, Naked Packed, Package,
32*1.98M
China
8417809090
Product Description
The device is 32 meters long and consists of 16 standard sections. 1-5 smoke exhaust preheating sections, each section is 2.1 meters long, with a total length of 10.5 meters; High temperature firing section 6-11 sections, each section is 1.8 meters long, with a total length of 10.8 meters;The rapid cooling section is section 12, which has 1.8 meters long ;The cooling section is 13-16 sections, each section is 2.2 meters long, with a total length of 8.8 meters.
The cooling air box is section 17, the length is 3 meters.
The kiln body adopts a steel frame as a protective structure and is equipped with decorative panels on the outside. Different refractory materials are used in the kiln according to the temperature. To reduce thrust and friction between the slide rail and the skateboard, the slope of the kiln inlet and outlet slide rails is 320mm. The kiln body is composed of several parts, including the kiln steel frame, refractory insulation materials, natural gas supply and combustion system, ventilation and exhaust system, material conveying system, electrical control system, etc.
| Specification | Index | Remark |
| Products | The Sagger | |
| Kiln section width | 1980mm | Preheating section is 1860mm |
| Push-plate Specification | 360×340×60mm | L×W×H(340 of them are kiln wide direction) |
| Width of bottom plate guide rail | 370mm | |
| Useful loading height | 870mm | |
| Firing control mode | Flow and ratio control mode | |
| Operation temperature | 1400ºC | Normal peak temperature |
| Design Temperature | 1500ºC | |
| Category of gas | Natural gas | |
| Cycle | 18-42h | Adjustable |
| Firing Atmosphere | oxidation | |
| Kiln defect | ≤2% | Including cold and hot cracking |
Pre-Sales service:
-Visit the factory, understand the demands and site measurement
-Issue a preliminary proposal, technology discussion
-Details' confirmation, organize the offer
-Sign the contract, kiln design and fabrication
After-sales service:
-Kiln installation and commissioning
-Operation and maintenance training
-Provision of detailed operation and maintenance manuals along with troubleshooting guides.
-Visit the factory, understand the demands and site measurement
-Issue a preliminary proposal, technology discussion
-Details' confirmation, organize the offer
-Sign the contract, kiln design and fabrication
After-sales service:
-Kiln installation and commissioning
-Operation and maintenance training
-Provision of detailed operation and maintenance manuals along with troubleshooting guides.
-Supply of spare parts for future maintenance needs.
-Detailed information on vulnerable materials for easy reference.
-Prompt technicial support and assistance by phone, video, email or solve at site if need.
