Audited Supplier
The the Full Bore Mechanical Setting RTTS Packer is a mechanical set double grip is shown in the accompanying figure. When starting the RTTS packer into the hole, place J-slot in the drag block sleeve in the locked position. The tool is run slightly below the desired setting position and is then picked up tool to setting position and rotated pipe several turns to right(on bottom, only 1/2 turn is required).Holding right torque in pipe, slack off the pipe weight until mechanical slips on the tool set and start taking weight .At the same time the packer element is compressed against the wall of the casing, then the packer can isolate the annular from the test zone. Self-guard hydraulic hold down mechanism can prevent the packer from bouncing up because of the high pressure below the packer. When it is extra, pressure can be into the annular space between the volume tube, hydraulic hold down body and the lower mandrel through the radial hole on the lower mandrel, then to reach the round hydraulic hold down slip and compress the slip retractor spring, then the round hydraulic hold down slip lean against the inside wall of the casing closely and help prevent the tool from being pumped up the hole.
| No. | Specifications | 9 5/8" RTTS Circulating valve |
| 1 | OD | 155.5mm |
| 2 | ID | 76.2mm |
| 3 | Total Length(Compress state) | 1088.7mm |
| 4 | Stroke | 167.5mm |
| 5 | Working pressure | 70Mpa |
| 6 | Tensile Strength | 2297KN |
| 7 | Circulating port areas | 2550mm |
| 8 | Service Temperature | -20oC~+204oC |
| 9 | End connection | 4 1/2"IF. BXP |
| 10 | Service Condition | H2S As per NACE MR 0175(>175oF) |
Dongying Zhaoxin Industry and Trade Co.,Ltd is an ISO-9001, ISO-14001, OHSAS-18001 certified company and has all the quality systems in place for design, planning,manufacturing and quality monitoring & traceability to ensure that Dongying Zhaoxin Industry and Trade Co.,Ltd products match the highest quality & reliability Standards similar to any International major in this field.
Dongying Zhaoxin Industry and Trade Co.,Ltd with perfect attitude, product and service, is going to make further development together with customers at home and abroad .
