Audited Supplier
ADS36-VAP/3 type multi-function Protective energy meter is designed to measure single phase two wire AC active energy and used in overvoltage protection, under voltage protection and over-current protection and temperature limit protection. In case of over-voltage fault, under-voltage fault or over-current fault in ine. this product can instantly power off the load to prevent electrical eauipment from being burnt. The over-voltage, under-voltage and over-current values of this product can all be set up by yourself and can be adjusted on the basis of local practical condition. lt is a long use-life product with the advantage of high stability, high over load capability, low power loss and wide working voltage range.
Basic Function
· LCD display with backlight, can display total active energy (kWh), real time current (A) , voltage(V), active power (W).
· Product self-design has function of lighting protection
· Overvoltage protection, under voltage protection and over-current protection can select auto-Reclosing mode or manual-Reclosing mode
· Automatic lower and upper temperature protection and recovery
· In case of over-voltage fault, under-voltage fault or over current fault in single phase line, the product can power off the
line and can automatically restore connecting the line over a time delay after voltage of the lien is recovered to normal
condition
· In case of transient over voltage in line, the product can protect the equipment from false operation
· In case that the line subjects to unstable voltage or sudden power-off and power-on due to loosened connection and other fault, the product will disconnect the line.
· When fault voltage of the line reaches the peak, the product itself will not be damaged.
· Under over-current protection mode, you also can select Malignant load protection (Pure Resistive Load limit) which is used for Apartments and Student Dormitories electric safety
· You can select the circuit output cycle switch on/off mode
· Led indication of over-voltage protection, under voltage protection and over-current protection
· Diversified design for the protection, you can closed any one of over-voltage protection, under-voltage protection and
over-current protection in any time
· 35mm din rail installation
Technical Data
Input Working Voltage | 85~300V AC |
Over Voltage Protection Value | 85-300V (default 270V) |
Under Voltage Protection Value | 85-300V (default 170V) |
Over Current Protection Value | 1-63A (default 40A) 1-80A(default 60A special order) |
Rated Frequency | 50/60Hz |
Delay in Switch on After Power off | 2-255s (default 2s) |
Voltage Circuit Power Consumption | 1W |
Current Circuit Power Consumption | <1VA |
Active Energy Display Range | 0-9999.9kWh |
Voltage/ Current/ Active Power Accurate | 0.5% |
Temperature Measure Range | -25ºC ~ +100ºC |
Temperature Accurate | +2ºC |
Active Energy Accurate | +1% (IEC62053-21) |
Operating Temperature | -25ºC ~ +70ºC |
Storage Temperature | -40ºC ~ +80ºC |
Relative Humidity | 85% |
Altitude | 2500m |
Electromagnetic Environment | E2 |
Mechanical Life | 100000 Cycles |
| |
| |
| |
Q1. What's the payment term?
A. We accept TT,30% deposit and 70% balance before shipping.
Q2. How's the delivery time ?
A. We depend on different products and different quantities. Generally, it takes about 3-15 days. If the quantity is very large, we need to negotiate.
Q3. Tell me the standard of package?
A. Normally are cartons, but also we can pack it according to your requirement.
Q4.Could you offer Form A or C/O ?
A. It's totally not a problem. We can prepare relative documents to forgin affairs office or other office to apply for thiscertificate.
Q5.Would you accept to use our logo ?
A.If you have good quantity,it absolute no problem to do OEM
