Audited Supplier
APM-96Q Multi-Function Power Analyzer is a high-end multifunction power meter. It is the ideal choice for monitoring and measuring of power systems. Using dot matrix LCD screen, can more easily display more electrical parameters on the same screen.
It can measure all of the power parameters in power grid:
Current, Voltage, Frequency, Active power, Reactive power, Apparent power, | Energy (Active/Reactive), Power factor Multi- tariffs ratio Current harmonics 2~63 times, Voltage harmonics 2~63 times, Voltage and current THD%, | Max demand, Harmonics factor, Voltage crest factor, Current K-factor, Voltage drop, Voltage flicker. |
With optional expansion modules, it can also transmit the parameter into 2*Relay output (2DO) and 6*Switch input (6DI), 3*Analog output (3AO). For transformers, generators, capacitor banks and motors of the distributed detection, automatic control system, on-line monitoring display. BJ-194Q provides max 100 lists of event logging, real-time saving DI/DO acted events, also can optional logging function for event tracing.
It can replace the traditional analog or many digital measurement instruments (such as ammeter, voltmeter, power meter, power factor meter, frequency meter, etc.) The integrated advanced electrical parameter and logging function can replace the general power recorder to perform real-time online monitoring, with the advantages of improving system reliability, making the on-site wiring convenient and reducing system cost.
With a serial port, APM-96Q can connect with PC, and use Modbus to set programming and read the data. Based on these power meters, you can simply set up a monitoring system with the IPC and central software.
·Measurement accuracy class 0.2
·Current measuring .../5 or .../1 A
·Clear and large matrix LCD screen
·Universal series power supply (85-265VAC/DC)
·ITF Technology: galvanic insulation protection inputs outputs
·Record and read tariffs ratio, Up to 3 months
·A variety of advanced electrical parameters can display the status of the power grid on the spot (Max demand/unbalance/crest factor/K factor...)
·Provide 5 virtual alarm trigger
·Provide max 100 lists SOE record
·1KHz Waveform Snapshot, capture length 1 second of voltage, current power flicker/drop for event tracing.
·With RS-485 Modbus/RTU Communications
·With 2-channel Pulse Output (PO) for active energy and reactive energy counting
·Optional 3-channel Analog Output (AO)
·Optional 6-channel Digital Input (DI) and 2 channel Digital Output (DO)
·Optional 128MB memory for data logger
| Power Supply | AC / DC 80-265V, 45-65Hz DC 20-60V (Optional) Burned < 10VA |
| Current Measurement | …/ 1A or …/5 A Burned < 0.1W |
| Voltage Measurement | Direct measurement 18~277V ac (L-N) PT secondary …/100Vac Burned < 0.1W |
| Frequency Measurement | 45~65Hz Resolution 0.01Hz |
| Accuracy | U & I - 0.2% ; P &Q - 0.5% Frequency - 0.1% Active Energy - 0.5s class Reactive Energy - 2.0s class |
| Communication Port | RS485 (2/3 wires half duplex) Modbus RTU mode |
| Pulse Outputs | 2 channel Coupler relay |
| Analog Outputs (Optional) | Max 3 channel Isolated 0 / 4 … 20 mA |
| Alarms Outputs (Optional) | Max 4 channel DO & 6 channel DI 230 VAC 5 A |
