Audited Supplier
TRH3028
Brake Discs
Non-Asbestos
Clutch Brake
ISO/TS16949, IATF-16949, ISO9001
Brake
Brake
North America, Western Europe, Domestic Market
Red
59 Teeth
Od385*ID178*T15.88mm
14 Inch
0.42-0.48
Clutch Power Transmission System
TALFRI
Wood Box+Pallet
As required
China
8708301000
Product Description
TRH3028, Non Asbestos Gear Teeth Facing For Industrial Brake/ Clutch System, is a Non Asbestos resin moulded with exceedingly high hardness and strength. After being impregnated with special resin and pressed into rigid flat sheet, the material shows outstandingly good resistance to wear and compression and excellent stability.
TRH3028 is a heavy duty material extensively used in oil drilling and wind power industry. It can be installed in industrial brake and clutch system, power transmission system and electric magnetic brake engine.
TRH3028 is a heavy duty material extensively used in oil drilling and wind power industry. It can be installed in industrial brake and clutch system, power transmission system and electric magnetic brake engine.
| Applications: | ||||
| TRH3028 has been specifically designed for use on medium to heavy duty industrial brake/clutch applications, especially gear tooth facings, mechanical drivers and any application requiring a high strength low wear material. TRH3028 is intended for dry running applications only. Gear tooth facing only can be produced by mould. | ||||
| Dimension: | ||||
| Length x Width: 762mm x 762mm (30inches x 30 inches) | ||||
| Thickness: 3.2mm-22mm ( 1/8 - 7/8 inch) | ||||
| Frictional Properties: | ||||
| Normal | 0.54 | |||
| Hot | 0.51 | |||
| 400°F | 0.52 | |||
| Recommended Operating Range: | ||||
| Max. Pressure, psi | 300 | |||
| Max. Rubbing Speed, ft/min | 5000 | |||
| Max. Intermittent Temperature | 650°F (340°C) | |||
| Max. Continuous Temperature | 600°F (315°C) | |||
