Biedas Jzy02aj Displacement Acceleration Sensor Transmitter Sensitivity Vibration Calibrator

    Thank you for choosing the BYD-JZY02AJ  vibration sensor calibrator. In order to give you a better understanding of the performance of the instrument and the correct use of the instrument, please pay attention to the following issues:
1. Please read this manual carefully before use.
2. When calibrating the sensor, follow the steps required in the manual according to the different types of sensors.
3. To prevent the vibration table from vibrating too much, before turning on the power, The potentiometer named "Gain adjustment" should be adjusted to the minimum in the counterclockwise direction.
4. The parameters of the BYD-JZY02AJ  vibration sensor calibrator are defined as:
Acceleration (m/S2)     peak value
Velocity (mm/S)           RMS
Displacement (µm)       peak-to-peak
5. When calibrating the sensor, the instrument should be placed as smoothly as possible.
6. When calibrating the velocity sensor, pay attention to the direction in which the sensor is installed. If it is a horizontal sensor, the calibrator should be placed horizontally; if it is a vertical sensor, the calibrator should be placed vertically; if it is a general-purpose sensor, the calibrator can be placed horizontally and vertically.
7. If you encounter any problems or have good comments and suggestions during use, please contact us as soon as possible.

Precautions