Audited Supplier
CDB Series and TDBY Series
Natural Diamond
Corundum Abrasives
Metal Parts
Surface Finish
Artificial Abrasives
Mill
Superabrasive
E-Grind
Box
hardness and thermal conductivity
China
8207901000
Product Description
The diamond wire drawing die blanks are produced under ultra-high temperature and ultra-high pressure. It consists of diamond powder and metal catalyst (Cobalt). It features high wear resistance, hardness and thermal conductivity, high mechanical strength, and tenacity. Diamond die blanks are mainly for drawing a wide range of wire such as copper, aluminum, nickel, stainless steel etc.
E-Grind provides two series of Diamond Wire Drawing Die Blanks: CDB Series and TDBY Series. 5 grades of grain size available: 3 microns, 5 microns, 10 microns, 25 microns and 50 microns.
CDBY Series: Self-supported Die Blanks (Round)
TDBY Series: tungsten carbide supported die blanks. It is for drawing with high intensity.
Tungsten Carbide supported Die Blanks (Round)
ADDMA: American Diamond Die Manufactures' Association
Factory
E-Grind provides two series of Diamond Wire Drawing Die Blanks: CDB Series and TDBY Series. 5 grades of grain size available: 3 microns, 5 microns, 10 microns, 25 microns and 50 microns.
E-Grind PCD Wire Drawing Dies Series
CDB Series: self-supported die blanks, for all types of wire drawing, especially where cost is the main concern.
CDBL Series: self-supported Die Blanks (Hexagonal)
| Part No. | ADDMA No. | Dimensions (mm) | Max. Die Size(mm) | Avg. Grain Size (um) | Diagram | ||||||
| D | d | T | 3 | 5 | 10 | 25 | 50 | ||||
| CDBL2510 | D6 | - | 2.5 | 1 | 0.4 | ○ | . | . | . | - | |
| CDBL3215 | D12 | - | 3.2 | 1.5 | 1 | ○ | . | . | . | - | |
| CDBL5225 | D15 | - | 5.2 | 2.5 | 1.5 | ○ | . | . | . | - | |
| CDBL5235 | D18 | - | 5.2 | 3.5 | 2 | ○ | . | . | . | - | |
| Part No. | ADDMA No. | Dimensions (mm) | Max. Die Size(mm) | Avg. Grain Size (um) | Diagram | ||||||
| D | d | T | 3 | 5 | 10 | 25 | 50 | ||||
| CDBY2510 | D6 | - | 2.5 | 1 | 0.4 | ○ | . | . | . | - | |
| CDBY 3215 | D12 | - | 3.2 | 1.5 | 1 | ○ | . | . | . | - | |
| CDBY 5225 | D15 | - | 5.2 | 2.5 | 1.5 | ○ | . | . | . | - | |
| CDBY 5235 | D18 | - | 5.2 | 3.5 | 2 | ○ | . | . | . | - | |
| CDBY 8040 | D21 | - | 8 | 4 | 3 | ○ | . | . | . | - | |
| CDBY 9853 | D24 | - | 9.8 | 5.3 | 4 | ○ | . | . | . | - | |
| CDBY 13085 | D27 | - | 13 | 8.5 | 5 | - | . | . | . | ○ | |
| CDBY160120 | D30 | - | 16 | 12 | 7 | - | - | . | . | ○ | |
CDBY Series: Self-supported Die Blanks (Round)
TDBY Series: tungsten carbide supported die blanks. It is for drawing with high intensity.
Tungsten Carbide supported Die Blanks (Round)
| Part No. | ADDMA No. | Dimensions (mm) | Avg. Grain Size (um) | Diagram | ||||||
| D | d | T | 3 | 5 | 10 | 25 | 50 | |||
| TDBY4015 | D12 | 8.12 | 4 | 1.5 | - | . | . | . | . | |
| TDBY4023 | D15 | 8.12 | 4 | 2.3 | - | . | . | . | . | |
| TDBY 4029 | D18 | 8.12 | 4 | 2.9 | - | . | . | . | . | |
| TDBY 7040 | D21 | 13.65 | 7 | 4 | - | . | . | . | . | |
| TDBY 7053 | D24 | 13.65 | 7 | 5.3 | - | . | . | . | . | |
| TDBY 12987 | D27 | 24.13 | 12.9 | 8.7 | - | . | . | . | . | |
| TDBY 129120 | D30 | 24.13 | 12.9 | 12 | - | - | . | . | . | |
| TDBY150120 | D30 | 24.13 | 15 | 12 | - | - | . | . | . | |
| TDBY152120 | D31 | 24.13 | 15.2 | 12 | . | . | ||||
| TDBY150120 | D33 | 24.13 | 15.2 | 15 | . | . | ||||
ADDMA: American Diamond Die Manufactures' Association
D: Total Blank Diameter d: Diamond Diameter
T: Diamond Thickness
Factory
