Digital Storage Oscilloscope Portable 2 Channels 200MHz Bandwidth 8 Inch USB Oscilloscopes Kits

Model

XDS3202E

Bandwidth

200MHz

Sample Rate

1GS/s

Vertical Resolution (A/D)

8bits

Record length

40M

Waveform Refresh Rate

75,000 wfms/s

Horizontal Scale (s/div)

1ns/div - 1000s/div, step by 1 - 2 - 5

Rise Time (at input, typical)

≤1.7ns

Channel

2 + 1 (external)

Display

8" color LCD, 800 x 600 pixels

Input Impedance

1MΩ ± 2%, in parallel with 15pF ± 5pF

Channel Isolation

50Hz : 100 : 1, 10MHz : 40 : 1

Max Input Voltage

1MΩ ≤ 300Vrms; 50Ω ≤ 5Vrms

DC Gain Accuracy

±3%

DC Accuracy

average≥16:±(3% reading + 0.05 div) for △V

Probe Attenuation Factor

0.001X - 1000X, step by 1 - 2 - 5

LF Respond (AC, -3dB)

≥5Hz (at input, AC coupling, -3dB)

Sample Rate / Relay Time Accuracy

±1ppm

Interpolation

sin(x) / x

Interval (△T) Accuracy

(full bandwidth)

Single: ±(1 interval time + 1ppm x reading + 0.6ns);
Average > 16: ±(1 interval time + 1ppm x reading + 0.4ns)

Input Coupling

DC, AC, and GND

Vertical Sensitivity

1mV/div - 10V/div (at input)

Trigger Type

Edge, Video, Pulse, Slope, Runt, Windows, Timeout, Nth Edge, Logic, I²C, SPI, RS232,

and CAN (optional)

Bus Decoding

I²C, SPI, RS232, and CAN (optional)

Trigger Mode

Auto, Normal, and Single

Vertical Range

±2V ( 1mv/div - 50mv/div), ±20V ( 100mv/div - 1V/div), ±200V (2V/div - 10V/div)

Line / Field Frequency (video)

NTSC, PAL and SECAM standard

Cursor Measurement

△V, and △T between cursors, △V and △T between cursors, and auto- cursors

Automatic Measurement

Vpp, Vavg, Vrms, Freq, Period, Week RMS, Cursor RMS, Vmax, Vmin, Vtop, Vbase, Vamp, Overshoot, Phase, Preshoot, Rise Time, Fall Time,+Width, -Width, +Duty, -Duty, Duty Cycle, Delay A→B ↑, Delay A→B↓, +Pulse Count, -Pulse Count, Rise Edge Count, Fall Edge Count

Waveform Math

+, -, ×, ÷, FFT

Waveform Storage

100 waveforms

Lissajou's
Figure

Bandwidth

full bandwidth

Phase Difference

±3 degrees

Communication Interface

USB host, USB device, USB port for PictBridge, Trig Out (P/F), LAN, and VGA (optional)

Frequency Counter

available

Power Supply

100V - 240V AC, 50/60Hz, CAT II

Power Consumption

<15W

Fuse

2A, T class, 250V

Battery (optional)

3.7V, 13200mAh

Dimension (W x H x D)

340 x 177 x 90 mm

Weight

2.60 kg