Audited Supplier
MM-993
2224-33-1
Structural Adhesive
Paste
Construction, Woodworking, Home Decoration
Silicone
Room Curing
Polysiloxane
Weatherability
Tackifier
Organic Material
White
One Component
Moisture Curing
White/Grey/Black
Excellent Weather Resistance
Strong Adhesion
Strong Aging Resistance
AEP
Carton
280ml/300ml/310ml/590ml/600ml
Xiamen, China
3506100010
Product Description
About Product:
MM993 Neutral Silicone Sealant is a neutral-curing structural adhesive specially designed for structural assembly and design of indoor and outdoor decoration projects.
The main purpose:
It is used in the installation of building doors and windows, the anti-seepage and sealing of glass and frame edges, the bonding and sealing of aluminum-plastic panel projects, and the caulking and sealing of indoor and outdoor decoration projects.
MM993 Neutral Silicone Sealant is a neutral-curing structural adhesive specially designed for structural assembly and design of indoor and outdoor decoration projects.
The main purpose:
It is used in the installation of building doors and windows, the anti-seepage and sealing of glass and frame edges, the bonding and sealing of aluminum-plastic panel projects, and the caulking and sealing of indoor and outdoor decoration projects.
| PRODUCT PARAMETERS | ||||
| NEUTRAL SILICONE SEALANT | ||||
| Performances | Standard | Measured Value | Test Methods | |
| At a relative temperature of 50 ± 5 per cent and a temperature of 23 ± 2°C | ||||
| Density (g/cm3) | ±0.1 | 1.2 | GB/T 13477 | |
| Unpacked time (Min) | ≤180 | 15 | GB/T 13477 | |
| Squeeze g/5S | ≥40 | 100 | GB/T 13477 | |
| Tensile modulus (Mpa) | 23ºC | ≤0.4 | 0.30 | GB/T 13477 |
| -20ºC | Or≤0.6 | 0.38 | ||
| Weight loss at 105°C, 24 hours % | / | 50 | GB/T 13477 | |
| Slidability (mm) Vertical | ≤3 | 0 | GB/T 13477 | |
| Slip resistance (mm) Level | 0 | 0 | GB/T 13477 | |
| Curing speed (mm/d) | 2 | 2.5 | / | |
| Cooling after 21 days at a relative temperature of 50±5% and 23±29°C | ||||
| Hardness (Shore A) | 20-60 | 35 | GB/T 531 | |
| Tensile strength at standard conditions (Mpa) | / | 0.12 | GB/T 13477 | |
| Elongation at break (%) | / | 400 | GB/T 13477 | |
| Mobility (%) | 12.5 | 12.5 | GB/T 13477 | |
Instructions for use
1.Before construction, the grass-roots level will be cleaned up, no dust, oil and other substances that affect the bonding strength.
2.This product can be used for spot gluing, the spot gluing area should be not less than 10% of the pasted area; you can also use the following 4mm tooth-shaped trowel to pull the teeth of the full scraping and paving, after the completion of the adhesive layer thickness of up to 3mm is good.
3.Adjustment should be completed within ten minutes after dispensing.
4.The product room temperature curing, surface drying time: 45Min, full curing time: 72h.
5.Application temperature range: -40ºC-+100ºC.
Precautions
1.Prohibit contact with water, steam, alcohol solvents (such as alcohol).
2.Construction temperature of 5-32 ºC is preferred.
3.We should wear gloves, masks, etc. for protection when using to prevent allergic reactions.
4.in order to prevent the liquid into the eyes caused by allergies, you can wear an eye mask when dispensing.
5.After construction, it is advisable to wash hands before drinking or eating to avoid ingesting glue components.
6.The product should be stored in a ventilated, dry, cool place, prevent direct sunlight, storage temperature 8-28 ºC.
Features:
1.Excellent weather resistance
2.Excellent aging resistance
3.High adhesion
4.High strength
5.High elongation
6.Anti-shrinkage
1.Excellent weather resistance
2.Excellent aging resistance
3.High adhesion
4.High strength
5.High elongation
6.Anti-shrinkage
The company takes customer as the centre, quality as the fundamental, innovation as the vitality, and is committed to developing into an adhesive enterprise trusted by customers. We have won the honours of National High-tech Enterprise, Xiamen High-tech Enterprise, Growing Enterprise, Speciality and New Enterprise, Intellectual Property Demonstration Enterprise, New Material Enterprise, and Demonstration Enterprise of Scientific and Technological Project Products.
Q1.:Can I get the Adhesive samples?A1.:Sure,We can provide you free samples.
Q2.:How to find the most suitable product for me?
A2.:Please tell us about the use or application of the adhesive you are purchasing, and we will recommend the right adhesive for you.
Q3.:Can you provide OEM service?
A3.:Yes, we can provide you with OEM service to customise your own branding and outer packaging.
Q4.:What is your delivery time?
A4.:For OEM order,delivery in 20-30 days.
Q5.:What is your terms of payment?
A5.:30% deposit in advance,70% paid in before shipment.
Q6.:What is the shelf life of your product?
A6.:12 months.
