Eco-Series Bottle Preform Injection System Eco 260

 ECO line series is Economy pet preform line. With or without The Take-out Robot with 3 Station Cooling ,Only 10S.
Demark 24,32,48cavities pet preform plant uses a new part cooling and handling system, which features:
  1.  Cooling on the inner surface of the preform without using compressed air, unlike most post-mold cooling systems which only cool the outer surface
   2.  Optimized cycle utilization - being mounted on the moving platen, the cooling system remains active for up to 85% of the overall cycle.

Demark pet preform injection molding systems are available from  24 to 48 cavities pet preform mould.

Demark pet injection systems offer:
  1.  Faster cycles(10S)
  2.  Reduced energy consumption
  3.  Smaller footprint 
  4.  Improved repeatability 
  5.  Rapid set-up
Reflex Platens
Reflex platens distribute clamp force evenly across the platen face.
Reflex platens:
  1.  Allow for 10-30% lower clamp tonnage 
  2.  Decrease mold wear 
  3.  Improve part quality 
 
Controls
DMK-based controls manage all functions of our PET production systems, with optional packages to integrate auxiliaries and downstream part handling equipment. Advantages include:
  1.  Faster cycle times 
  2.  Improved shot-to-shot repeatability 
  3.  Remote connectivity through ServiceNetLink 
  4.  Control of molding system and auxiliaries from a single interface 
 
Linear Bearings
Linear bearings support the moving platen directly on the machine base. This design reduces mold wear by improving platen alignment and perpendicularity, and provides a grease free molding environment.