Matching products: Flame amplifier: R7249A, B, R7849A, B, R7749B, R7259, R7290
Certification: Canadian Standards
Association: Certified: Master Report LR95329-1
Factory Mutual: Approved: Report NO. 24181.03 Industrial Risk
Description | UV, Minipeeper |
Application | Coal Burner; Gas Burner; Oil Burner |
Installation | Combination nut for 1/2 inch sight pipe installation. |
Vibration level | 0.5g max |
Electrical Connections | 2 NEC Class 1 conductors |
Ambient Temperature Range | 0 F to 215 F (-18 C to +102 C) |
Use:
Flame detectors are used to monitor gas flames, yellow or blue fuel combustion flames, and calibration of ignition sparks.
Flame Detector UV Sensor C7035A1023 Photocell UV Flame Detector For Industrial Burner
FEATURES:
• For use with Honeywell flame safety master controllers and combustion requiring UV flame detection on the device.
• Mount the C7027 on a 1/2 inch viewing pipe via a combi port.
• The detectors can be connected in parallel when it is difficult to observe.
• When properly installed, the C7027 seal will withstand pressures up to 5psi (34.5Pa).
• Due to the compact size, additional air ducts are allowed.
• The C7044 is mounted by two screw brackets.
• The C7044 UV sensor tube is housed in a stainless steel housing.
• In flame monitoring applications, the C7044 can be viewed from the side or bottom.







