Audited Supplier
LX-LMP4104
Flexible Circuit Silver Paste
Guangdong, China
72+-1.0%
7440-22-4
Longxin
Carton
1kg/can
China
Product Description
Foshan Longxin New Material Co., Ltd. Pricing Structure: 1 year CN 100 - 499 grams: $0.94 500 - 999 grams: $0.91 >= 1000 grams: $0.88 Quantity: - + Offering competitive pricing for bulk purchases, ensuring value for your investment in high-performance materials.
Model | LX-LMP4104 |
Solid content% | 72±1.0 |
Viscosity (dPa.s) | 300±50 |
Finenessμm | ≤9 |
Square resistance(mΩ/sq/mil) | ≤9 |
Curing conditions | 1stTunnel furnace: 135*6 min2ndOven: 135*40 min |
Process recommendation | Screen printing, polyester mesh or stainless steel mesh (250 mesh) |
Currently, shipping solutions for the selected quantity are unavailable. However, rest assured that we are committed to optimizing your shipping experience. Item subtotal (0 variations 0 items): $0.00 Shipping total: $0.00 Subtotal: $0.00 Contact us for custom shipping solutions and assistance.
Protections for this product: Enjoy peace of mind with secure payment options powered by strict SSL encryption and PCI DSS data protection protocols on . Benefit from our Easy Return & Refund policy, with refunds available for missing orders or product issues, and free local returns for defects on qualifying purchases. safeguards all your transactions conducted on the platform.
Foshan Longxin New Material Co., Ltd.
Q: How many days is the price valid for?
A: The price is valid for one day due to daily fluctuations in silver price. Please consult the salesperson for the exact price.
Q: How should the conductive paste be stored?
A: a. Short-term storage. Seal and place at room temperature within 3-5 days.
b. For long-term storage, sintering slurry (sintering temperature above 400°C) can be stored at room temperature below 25°C, and stored in a refrigerator when the room temperature is higher than 25°C.
c. Quick-drying slurry and low-temperature curing slurry (below 200°C) can be stored in a refrigerator at 5~15°C.
d. Regardless any type of slurry, remember to seal it during storage.
Q: What are the precautions before using conductive paste?
A: a. Take it out half a day in advance to warm it up or preheat it in a ventilated oven at 25~30°C for 20 minutes.
b. Do not open it before it returns to room temperature to prevent water vapor from cooling into the paste.
Q: What should be paid attention to when using the conductive paste?
A: a. Make sure the paste is consistent with the ambient temperature.
b. Stir it thoroughly before use to restore the performance of the paste.
Q: Do we need to add diluent when using conductive paste?
A: a. Generally, the viscosity of the paste is adjusted before leaving the factory, so it can be used directly after fully stirring without adding diluent.
b. If it is necessary to add due to the process, such as increasing fluidity, spraying process, etc., add small amounts gradually and stir thoroughly. Do not add too much at one time.
c. Please use special diluents and do not mix them to cause performance changes.
A: The price is valid for one day due to daily fluctuations in silver price. Please consult the salesperson for the exact price.
Q: How should the conductive paste be stored?
A: a. Short-term storage. Seal and place at room temperature within 3-5 days.
b. For long-term storage, sintering slurry (sintering temperature above 400°C) can be stored at room temperature below 25°C, and stored in a refrigerator when the room temperature is higher than 25°C.
c. Quick-drying slurry and low-temperature curing slurry (below 200°C) can be stored in a refrigerator at 5~15°C.
d. Regardless any type of slurry, remember to seal it during storage.
Q: What are the precautions before using conductive paste?
A: a. Take it out half a day in advance to warm it up or preheat it in a ventilated oven at 25~30°C for 20 minutes.
b. Do not open it before it returns to room temperature to prevent water vapor from cooling into the paste.
Q: What should be paid attention to when using the conductive paste?
A: a. Make sure the paste is consistent with the ambient temperature.
b. Stir it thoroughly before use to restore the performance of the paste.
Q: Do we need to add diluent when using conductive paste?
A: a. Generally, the viscosity of the paste is adjusted before leaving the factory, so it can be used directly after fully stirring without adding diluent.
b. If it is necessary to add due to the process, such as increasing fluidity, spraying process, etc., add small amounts gradually and stir thoroughly. Do not add too much at one time.
c. Please use special diluents and do not mix them to cause performance changes.
