Audited Supplier
40-45-50
1 Year
Hydraulic Pipe and Tube Bending Machine
Semi-Automatic
Aluminum
Rectangle
1 Year
New
30
8-76mm
Manual Pipe Tube Bender
+-1
None
30kg
0
1 Year
180
Other
2022
40*30*20cm
3pics/Min
20 - 450
GEYU
Wooden Pallet
Henan, China
Product Description
Wg-25 Manual pipe bender is mainly used to bend pipes of different wall thicknesses and materials, such as round or square low carbon steel pipes, stainless steel pipes, etc., to bend these pipes into different shapes with different arc diameters and angles.
Electric Small Semi-Automatic CNC Pipe Bending Machine Technical Parameter | ||||||||||
Model | TWG-25 | TWG-38 | TWG-50 | TWG-75 | TWG-89 | |||||
Round tube range | ≤Φ25x2mm | ≤Φ38x2mm | Φ50x2.5mm | ≤Φ75x2.5mm | Φ75x6mm | |||||
Square tube range | ≤ 25*25 * 1.5 | ≤ 30*30 * 2.5 | ≤ 40*40 *2.5 | ≤ 50*50 *2.5 | ≤ 60*60 * 2.5 | |||||
high bending speed | 10r/min | 9r/min | 7r/min | 5r/min | 5r/min | |||||
Bending angles | 5-180° | 5-180° | 5-180° | 5-180° | 5-180° | |||||
bending angle quantity | 9 | 9 | 9 | 9 | 9 | |||||
Motor Power | 1.1kw | 2.2kw | 4kw | 4kw | 7.5kw | |||||
Power supply | 380V,50Hz,3Phase Alternating Current Or Customized | |||||||||
Size | 850x600x850 | 920x700x890 | 930x780x890 | 990x780x890 | 1480*780*890 | |||||
Weight | 190kg | 300kg | 350kg | 460kg | 700kg | |||||
Mould customization
Different size pipes need different molds,same size pipe with different bending radius also need different molds
How to measure your pipe and bending radius
supplly your pipe diameter and pipe wall thicknessLook at the picture above
Buyers requirements
Warm tip: the actual thickness of many pipes on the market is not as much as its standard thickness, often standard
The ACTUAL thickness OF the PIPE with a thickness of 0.8 is only about 0.5. In order to obtain the best bending
Warm tip: the actual thickness of many pipes on the market is not as much as its standard thickness, often standard
The ACTUAL thickness OF the PIPE with a thickness of 0.8 is only about 0.5. In order to obtain the best bending
effect, Please make sure to measure the actual thickness of the pipe to be bent and select the corresponding
diameter and thickness of the bender model.
01 Manual pipe bender will have a certain error after bending (the pipe will rebound after bending), which is wrong
The difference range is 0-1cm, and the rebound range is related to the material, the thickness of the pipe, the size
01 Manual pipe bender will have a certain error after bending (the pipe will rebound after bending), which is wrong
The difference range is 0-1cm, and the rebound range is related to the material, the thickness of the pipe, the size
and the diameter of the bending wheel.
02 BENDING PIPE is a deformation process, it is impossible to achieve no damage, how to make the pipe
bending out more beautiful, need to bend the thickness of the pipe is a little thicker, the radius of the bend is a little
02 BENDING PIPE is a deformation process, it is impossible to achieve no damage, how to make the pipe
bending out more beautiful, need to bend the thickness of the pipe is a little thicker, the radius of the bend is a little
larger, inside filling such as sand;
03 Although the manual bending pipe is equipped with bearings to save labor, the bending thick pipe still needs to be
lengthened Rod, pay attention to the bending machine fixed firmly when used for the first time, and gradually use force,
so as not to bebounced by accidental injury;
