Audited Supplier
850-600um
Natural Corundum
Silicon Carbide Abrasive
Instrumentation
Surface Finish
Natural Abrasives
Powder
6-7 Moh's
80%
30#
<0.1
HYX
Knitting Plastic Bag or Pallets
Density: 2.4-2.6g/cm3
China
7018200090
Product Description
Has the features of chemical stability, high mechanical intensity and hardness.They can be blasted onto the object surface with compressed air and can be used on compress glass,rubber,plastic,moulds with metal casting or compressing. The jetting balls would help reduce elasticity of the surface materials and increase wearing capacity.
Main products specification for sandblasting according to following table:
You can choose different size glass bead between 45um-850um according to different function.
High strength glass beads (for Blasting):
With compressed air as implicit power,this product is made by sprinkling beads under high speed and pressure on the surface of work piece for peening and polishing.
Other purpose of the produces are as follows:
1) Clear diverse moulds of impact forging,forging,glass,rubber and plastic,metal casting and extrusion.
2)Eliminate tensile stress,increase fatigue life and enhance stress corrosion resistance. For example,airecraft engine turbo,vane,shaft,undercarriage,diversified springs and gears,etc.
3)Clean and remove slitter edge and burr on the circuit plate and plastic-sealed geminate transistors before stannum soldering.
4)Remove stems in the piston and cylinder and provide bright and half-lackluster surface for medical mechanical instruments and automobile parts.
5)Clear electromotor and such parts as loop,electric brush and rotor of during heavy repair.
6) Clean up and remove burr of metal tube and precisely-melten non-ferrous metal tube.Be used for peening aggrandizement and polishing of textile machinery parts.
Technical references
A:Appearance: Clean and transparent,no visible bubbles and impurity;
B:Density:2.4-2.6g/cm3;
C:Hardness:6-7(Moh's);
D:Spherical beads:≥75%;
E:SiO2 content:>72%
Package:
1.Using double-deck package,the inner is polythene film and its thickness is not less than 0.5mm,the outer is plastic woven bag to prevent leak or damp.The net weight of each bag is 25±0.2kg.
2.Using double-deck package,the inner is polythene film and its thickness is not less than 0.5mm,the outer is plastic woven bag to prevent leak or damp.The net weight of each is 1000±8kg.
3.According to clients' requirement.
Main products specification for sandblasting according to following table:
| Item | Diameter(um) | Mesh Size |
| HYX-G01 | 850-425 | 20-40 |
| HYX-G02 | 425-250 | 40-60 |
| HYX-G03 | 250-150 | 60-100 |
| HYX-G04 | 150-105 | 100-140 |
| HYX-G05 | 105-75 | 140-200 |
| HYX-G06 | 75-45 | 200-325 |
You can choose different size glass bead between 45um-850um according to different function.
High strength glass beads (for Blasting):
With compressed air as implicit power,this product is made by sprinkling beads under high speed and pressure on the surface of work piece for peening and polishing.
Other purpose of the produces are as follows:
1) Clear diverse moulds of impact forging,forging,glass,rubber and plastic,metal casting and extrusion.
2)Eliminate tensile stress,increase fatigue life and enhance stress corrosion resistance. For example,airecraft engine turbo,vane,shaft,undercarriage,diversified springs and gears,etc.
3)Clean and remove slitter edge and burr on the circuit plate and plastic-sealed geminate transistors before stannum soldering.
4)Remove stems in the piston and cylinder and provide bright and half-lackluster surface for medical mechanical instruments and automobile parts.
5)Clear electromotor and such parts as loop,electric brush and rotor of during heavy repair.
6) Clean up and remove burr of metal tube and precisely-melten non-ferrous metal tube.Be used for peening aggrandizement and polishing of textile machinery parts.
Technical references
A:Appearance: Clean and transparent,no visible bubbles and impurity;
B:Density:2.4-2.6g/cm3;
C:Hardness:6-7(Moh's);
D:Spherical beads:≥75%;
E:SiO2 content:>72%
Package:
1.Using double-deck package,the inner is polythene film and its thickness is not less than 0.5mm,the outer is plastic woven bag to prevent leak or damp.The net weight of each bag is 25±0.2kg.
2.Using double-deck package,the inner is polythene film and its thickness is not less than 0.5mm,the outer is plastic woven bag to prevent leak or damp.The net weight of each is 1000±8kg.
3.According to clients' requirement.
