HRA4080 RF Comprehensive Tester Frequency Range 5kHz~8GHz

Features
Vector Network Analysis
Frequency Range:100kHz~-8GHz
Measurement Parameters:S11,S21
Display Mode: Return loss, VswR, lnsertion loss, Smith chat, Phase, Group delay
Antenna DTF
VSWR, Cable Loss Measurement
Distanee To Fault Measurement
Vector Voltage Meter
Comparing the amplitude and phase differences ofreflections between test cables
Swept Spectrum Analysis
RBW:1Hz~5MHz
DNL:-162dBm@1Hz(Pre-Amplifier on)
Phase Noise:<-98dBc/Hz@10kHz;
Field Strength Measurement
Measurement Mode: Point frequency, Frequency step sweep, List sweep
Built-in antenna factors
Determining the maximum field strength using a direetional antenna
Measuring the field strength using an omnidirectional antenna
Real-time Spectrum Analysis
Frequency range:5KHz~8GHz
Real-time Bandwidth:40MHz
Minimum duration with100%POl:7us
Panoramic scanning rate:80GHz/s
Display Mode:Spectrum, Density, Spectrogram, Power VS. Time
Trigger Mode: External, IF power level, FMT, PPS
Interference Location
Electronic map traeking measurement
Multi-point cross-location
Supporting maps copying and loading
Power Measurement
Supporting USB Power Meter (UP60)
Analog Modulation Analysis
AM modulation:Modulation rate:20Hz~100kHz, Modulation depth:10%~95%
FM modulation:Modulation rate:20Hz~100kHz, Frequency offset:100Hz~400kHz
General Parameters
Dimensions:334mmx242mmx68mm,Weight:<4.1kg
Long endurance up to 3 hours
LAN and USB interfaces for remote control and measurement data transfer