Audited Supplier
HS-4433
N/A
N/A
N/A
Carbon Chain Polymer
HS-1102H
300-500cP
8.0-18.0min
5.0-13.0mgKOH/g
72.0MPa
3050MPa
Xinshen/Huake
IBC Tank/Drum
Bisphenol A
Jiangsu, China
3907910000
Product Description
Product Name: Epoxy Vinyl Ester Resin HS-4433
1. Brief Introduction:HS-4433 is a regular bisphenol A epoxy vinyl ester resin which is used in the production of many kinds of FRP, such as anti-corrosive lining, Rebar, FRP tank, electrical insulating materials and frp mold. HS-4433 is suitable for hand lay-up, pultrusion, RTM, and filament winding process, etc. It also has good mechanical strength, toughness and great heat resistance and corrosion resistance.
2.Technical Data Sheet for Liquid Resin:
| Item | Standard Requirements | Test Method |
| Appearance | Yellow transparent liquid | GB/T 8237.6.1.1 |
| Viscosity(25ºC,cP) | 300-500 | GB/T 7193.4.1 |
| Geltime(25ºC,min) | 8.0-18.0 | GB/T 7193.4.6 |
| Acid Value(mgKOH/g) | 5.0-13.0 | GB/T 2895 |
Curing system in GT test: Accelerator KC: 2%;hardener AKZO LPT: 2%;
3. Physical properties of casting(for reference only):
| Item | Unit | Test Value | Test Method |
| Tensile Strength | MPa | 72 | GB/T 2568 |
| Tensile Modulus | MPa | 3050 | GB/T 2568 |
| Breaking Elongation | % | 4 | GB/T 2568 |
| Flexural Strength | MPa | 130 | GB/T 2570 |
| Flexural Modulus | MPa | 3100 | GB/T 2570 |
| Impact Strength | KJ/m2 | 7 | GB/T 2571 |
| HDT | ºC | 110 | GB/T 1634 |
| Hardness(Barcol 934-1) | -- | 38 | GB/T 3854 |
Note:
4. Recommended using ratio(weight ratio):
1) Avoid exposure to heat sources such as direct sunlight or steam pipes. Stored in a dry place at temperatures below 25ºC.
2) Keep sealed to prevent moisture pick-up and monomer loss. Prolonged storage outside of recommended conditions can influence liquid resin properties like viscosity and gel time.
3) Transportation should fit the State Council "Chemistry Dangerous Articles Safety Management Regulations". Because it contains styrene monomer, it is hazardous and inflammable.
1) Curing System: Accelerator KC: 1.5% ; hardener AKZO LPT: 1.5%;
2) Post curing: RT×24hrs +80ºC×4hrs(tensile and impact test); RT×24hrs +120ºC×4hrs(flexural, hardness and HDT test);
4. Recommended using ratio(weight ratio):
| A | Resin/HS-926/ButanoxLPT | 100/0.3~1.0/1.0~2.0 |
| B | Resin/HS-935/V388 | 100/1.0~2.0/1.2~4.0 |
| C | Resin/DMA/BPO | 100/0.15~0.4/1.0~3.0(absolute content) |
Note:
1) The using ratio listed above is suitable for 15~30ºC. Before use in large doses, please confirm the appropriate adding proportion according to the site environment.
2) HS-926: cobalt naphthenate or cobalt iso-octoate, available content is 6%;
HS-935: cobalt iso-octoate, available content is 1.5%;
Production made by the former is more beautiful.
5. Storage:1) The using ratio listed above is suitable for 15~30ºC. Before use in large doses, please confirm the appropriate adding proportion according to the site environment.
2) HS-926: cobalt naphthenate or cobalt iso-octoate, available content is 6%;
HS-935: cobalt iso-octoate, available content is 1.5%;
Production made by the former is more beautiful.
1) Avoid exposure to heat sources such as direct sunlight or steam pipes. Stored in a dry place at temperatures below 25ºC.
2) Keep sealed to prevent moisture pick-up and monomer loss. Prolonged storage outside of recommended conditions can influence liquid resin properties like viscosity and gel time.
3) Transportation should fit the State Council "Chemistry Dangerous Articles Safety Management Regulations". Because it contains styrene monomer, it is hazardous and inflammable.
Q: Is Your Company a Manufacturer?
A: Yes, indeed.We have 48,800 square meters factory located in Jiangsu Province, China.
A: Yes,we can provide 1kg of resin as a free sample, but freight are typically the responsibility of the buyer.
Q: Do you have OEM/ODM service?
A: Yes, we are highly flexible in offering OEM/ODM services.
Q: Can I Customize the Formulation of Unsaturated Polyester Resin for My Project?
A: Yes, absolutely. We understand that different projects may have unique requirements. Our R & D department is well-equipped to handle custom formulations based on your specific needs. You can provide us with the details of your project, including any specific characteristics or performance criteria you are looking for, and our experts will work on tailoring a formulation that meets your requirements.
Q: How Do I Choose the Right Unsaturated Polyester Resin for My Application?
A: We would provide guidance on selecting the appropriate UPR based on different project requirements.
Q: What Certifications and Quality Standards Does Your Unsaturated Polyester Resin Meet?
A: Our Unsaturated Polyester Resin meets CCS, RoHS, REACH, EMS, and QMS certifications and quality standards.
Q: What is Your Company's International Transportation Form?
A: For samples, we offer Delivery Duty Paid (DDP) services for most of the countries. This means that we handle the delivery process, including the payment of taxes, and you won't be required to manage customs clearance. For bulk orders, we normally transported by sea or land. Our commitment is to ensure the secure and efficient delivery of our products to your specified destination.
Q: What is The Product Lead Time?
A: 15 days.
Q:Can I Get a Lower Price for a Large Quantity Order ?
A: Absolutely. The online price serves as a reference, but due to fluctuations in raw material costs, our sales team can provide you with the most accurate and competitive pricing. Before making a purchase, kindly engage with our sales representatives. They will work closely with you, taking into account your order quantity and specific requirements, to ensure you receive the best and most cost-effective pricing tailored to your needs.
Q:What's Shelf Life of Unsaturated Polyester Resin ?
A: Normally 6 months.
