Audited Supplier
LX-DG1002L
71.0+-2.0%
Guangdong, China
Chip Inductor Silver Paste
Industrial Grade, Electron Grade
Longxin
Carton
1kg/can
China
Product Description
Experience our competitive pricing for premium quality! 1 yrCN: Choose from 100 to 499 grams at just $1.01 per gram Enjoy a reduced rate of $0.98 per gram for orders between 500 and 999 grams Unlock the best value with $0.95 per gram for orders of 1000 grams or more
Model | LX-DG1002L |
Solid content% | 71.0±2.0 |
Viscosity (dPa.s) | 600-700 |
Finenessμm | ≤10.0 |
Pulling forceKG | ≥10 |
At the moment, shipping solutions for your selected quantity are not available. Please contact our support for personalized assistance.
Experience unparalleled protection for your transactions: Secure payments: Every transaction on is fortified with robust SSL encryption and PCI DSS data protection standards. Standard refund policy: Claim a refund if your order doesn't ship, is missing, or arrives with product discrepancies. guarantees safety for all orders placed and paid for on the platform.
Foshan Longxin New Material Co., Ltd.
Q: How many days is the price valid for?
A: The price is valid for one day due to daily fluctuations in silver price. Please consult the salesperson for the exact price.
Q: How should the conductive paste be stored?
A: a. Short-term storage. Seal and place at room temperature within 3-5 days.
b. For long-term storage, sintering slurry (sintering temperature above 400°C) can be stored at room temperature below 25°C, and stored in a refrigerator when the room temperature is higher than 25°C.
c. Quick-drying slurry and low-temperature curing slurry (below 200°C) can be stored in a refrigerator at 5~15°C.
d. Regardless any type of slurry, remember to seal it during storage.
Q: What are the precautions before using conductive paste?
A: a. Take it out half a day in advance to warm it up or preheat it in a ventilated oven at 25~30°C for 20 minutes.
b. Do not open it before it returns to room temperature to prevent water vapor from cooling into the paste.
Q: What should be paid attention to when using the conductive paste?
A: a. Make sure the paste is consistent with the ambient temperature.
b. Stir it thoroughly before use to restore the performance of the paste.
Q: Do we need to add diluent when using conductive paste?
A: a. Generally, the viscosity of the paste is adjusted before leaving the factory, so it can be used directly after fully stirring without adding diluent
b. If it is necessary to add due to the process, such as increasing fluidity, spraying process, etc., add small amounts gradually and stir thoroughly. Do not add too much at one time.
c. Please use special diluents and do not mix them to cause performance changes.
A: The price is valid for one day due to daily fluctuations in silver price. Please consult the salesperson for the exact price.
Q: How should the conductive paste be stored?
A: a. Short-term storage. Seal and place at room temperature within 3-5 days.
b. For long-term storage, sintering slurry (sintering temperature above 400°C) can be stored at room temperature below 25°C, and stored in a refrigerator when the room temperature is higher than 25°C.
c. Quick-drying slurry and low-temperature curing slurry (below 200°C) can be stored in a refrigerator at 5~15°C.
d. Regardless any type of slurry, remember to seal it during storage.
Q: What are the precautions before using conductive paste?
A: a. Take it out half a day in advance to warm it up or preheat it in a ventilated oven at 25~30°C for 20 minutes.
b. Do not open it before it returns to room temperature to prevent water vapor from cooling into the paste.
Q: What should be paid attention to when using the conductive paste?
A: a. Make sure the paste is consistent with the ambient temperature.
b. Stir it thoroughly before use to restore the performance of the paste.
Q: Do we need to add diluent when using conductive paste?
A: a. Generally, the viscosity of the paste is adjusted before leaving the factory, so it can be used directly after fully stirring without adding diluent
b. If it is necessary to add due to the process, such as increasing fluidity, spraying process, etc., add small amounts gradually and stir thoroughly. Do not add too much at one time.
c. Please use special diluents and do not mix them to cause performance changes.
