Audited Supplier
LSA for S/BMC
Clear Liquid
140-190 MPa.S
4.0-7.0mgkoh/G
40-45%
≦0.1%
Class a Surface Level
Promisechem
200kg or 1000kg
Changzhou China
Product Description
Low shrinkage additives for SMC/BMC applicatio
SMC/BMC Description
- Thermoplastics resin in styrene monomer,medium reactivity.
- Nearly zero shrinkage and it could improve the surface smooth and the gloss.
- Low viscosity to achieve a high filler loading.
- Contact us prior to use due to weak coloring.
- Class A surface level
SMC/BMC Application
- Low shrinkage additive formulations for S/BMC.
- Electrical appliances,residence,industrial parts,water tanks and auto motive parts etc.
SMC/BMC Package
200kg or 1000kg
- Thermoplastics resin in styrene monomer,medium reactivity.
- Nearly zero shrinkage and it could improve the surface smooth and the gloss.
- Low viscosity to achieve a high filler loading.
- Contact us prior to use due to weak coloring.
- Class A surface level
SMC/BMC Application
- Low shrinkage additive formulations for S/BMC.
- Electrical appliances,residence,industrial parts,water tanks and auto motive parts etc.
SMC/BMC Package
200kg or 1000kg
SMC/BMC Shelf life
- 3months under 25ºC,away from heat sources, direct sunlight or steam pipes,rain etc.
- Keep sealed to prevent moisture pick-up and monomer loss.
SMC/BMC Safety attention
- Resin solutions contain volatile and flammable monomers such as styrene(flash point : 31ºC)
- The resin should be handled and used in well ventilated, flame proof areas
-To wear gloves and goggles to guard against any skin/ eye irritation arising from the presence of
styrene. Under no circumstances must accelerators be mixed with peroxide catalysts as it can cause explosions.
- Transportation should according to the State Council "Chemistry Dangerous Articles Safety Management Regulations" due to it contains styrene monomer.
inflammable.
- 3months under 25ºC,away from heat sources, direct sunlight or steam pipes,rain etc.
- Keep sealed to prevent moisture pick-up and monomer loss.
SMC/BMC Safety attention
- Resin solutions contain volatile and flammable monomers such as styrene(flash point : 31ºC)
- The resin should be handled and used in well ventilated, flame proof areas
-To wear gloves and goggles to guard against any skin/ eye irritation arising from the presence of
styrene. Under no circumstances must accelerators be mixed with peroxide catalysts as it can cause explosions.
- Transportation should according to the State Council "Chemistry Dangerous Articles Safety Management Regulations" due to it contains styrene monomer.
inflammable.
Liquid resin property
| Item | Value |
| Appearance | Clear liquid |
| Viscosity at 25ºC | 140-190 mPa.s |
| Acid value | 4.0-7.0mgKOH |
| Solid content | 40-45% |
| Moisture content | <=0.1% |
Other relative low shrinage(profile) resins for S/BMC application
| Type | Viscosity at 25ºC(mPas) | Application field | Characteristics |
PS | 2700-3700 | Sanitary ware,Electrical & communications,rail car,construction | Good coloring. High hardness surface. Good physical properties. |
| 5000-8000 | Electrical & communications. Automotive parts ,railcar. | High impact toughness. High hardness surface. Good physical properties. | |
| 11000-16000 | Electrical & communications | Good coloring. Low shrinkage controlled. Good physical properties. | |
| PMMA | / | Sanitary ware | High surface hardness. High physical properties. |
| Saturated polyester | 800-1000 | Sanitary ware,construction, Automotive parts,railcar. | Class A surface. High gloss. Better physical properties. |
| 145-185 | Electrical & communications Automotive parts, construction | High gloss. Low shrinkage controlled. Good physical properties. | |
| 300-400 | Automotive parts, construction | Good coloring. High gloss. Good physical properties. | |
| PVAc | / | Automotive parts. | High hardness Class A surface. Better physical properties. High gloss |
We focus on composites resin business and have a tolling plant in Changzhou city. We can supply all kinds of modified resin to feed up your solutions for composites. The business covers the total composites industry.
Q1:Do you provide sample for the trial?
A1:We could supply small size package for free.but we have to charge the freight.
Q2.Could you supply customized products friendly?
A2: Yes,we do.We have a team to sever in Fortune 500 and be able to supply products to satisfied with the end-users' technical requirement.
Q3. What about your lead time?
A3: Generally 2-4weeks after the order confirmed.
Q4. What are your terms of payment?
A4:Usually we do EXW, FOB, CIF, and DDP.
