Audited Supplier
5axis
1
1
DRC
Packing in Seaworthy Wooden Cases
Dimension(L*W*H): 2800*2360*2450mm
China
Product Description
5 Axis Metal Vertical Cnc Milling Machine Machining Center
5 Axis Metal Milling Machine Cnc Vertical Machining Center
The overall layout of the machine tool is a whole structure, the base is fixed, and the bed saddle moves in the Y direction on the base; The table moves in X direction on the bed saddle; The column is installed on the base, and the headstock moves in the Z direction on the column.
1. A/C shaft is driven by precision worm gear with strong rigidity.
2. Three-axis roller linear guide, strong rigidity, good dynamic accuracy.
3. Headstock adopts integral direct connection headstock to reduce installation error and improve overall rigidity.
4. Double nut rear row, small footprint, suitable for line installation.
High rigidity spindle: The highly rigid Taiwan brand BT40 spindle, lubricated with grease, can make the spindle bearing get constant and reliable lubrication.
High precision rotarytable: A/C shaft is driven by precision worm gear with strong rigidity.
Major structure: The main structure is based on the mold machine, superimposed cradle turntable, strong rigidity, good accuracy retention.
The overall layout of the machine tool is a whole structure, the base is fixed, and the bed saddle moves in the Y direction on the base; The table moves in X direction on the bed saddle; The column is installed on the base, and the headstock moves in the Z direction on the column.
1. A/C shaft is driven by precision worm gear with strong rigidity.
2. Three-axis roller linear guide, strong rigidity, good dynamic accuracy.
3. Headstock adopts integral direct connection headstock to reduce installation error and improve overall rigidity.
4. Double nut rear row, small footprint, suitable for line installation.
High rigidity spindle: The highly rigid Taiwan brand BT40 spindle, lubricated with grease, can make the spindle bearing get constant and reliable lubrication.
High precision rotarytable: A/C shaft is driven by precision worm gear with strong rigidity.
Major structure: The main structure is based on the mold machine, superimposed cradle turntable, strong rigidity, good accuracy retention.
Machine Type | Unit | MX400 |
Worktable | ||
Rotating table size | mm | 410 |
Load on worktable | kg | 150/200 (90 degrees/horizontal) |
Division angle | 0.001° | |
Indexing accuracy | A-axis 60 / C-axis 15 | |
Repeated accuracy | A-axis 8/ C-axis 6 | |
Distance from spindle nose to work surface | mm | 50-600 |
Travel | ||
X-axis | mm | 720 |
Y-axis | mm | 600 |
Z-axis | mm | 550 |
A-axis | 30°~-120° | |
C-axis | 360° | |
Spindle | ||
Spindle taper | BT40 | |
Rotating spindle speed | rpm | 10-12000 |
Spindle motor | kw | 11 |
Feed speed | ||
Cutting feed speed | m/min | 7 |
Fast feed speed | m/min | 30/30/30 |
Maximum rotation speed of A-xis | rpm | 11.1 |
Maximum rotation speed of C-xis | rpm | 16.6 |
Tool magazine | ||
Capacity of tool magazine | 24 | |
Max. tool weight | kg | 8 |
Max. tool length | mm | 300 |
Max. tool diameter | mm | 80 |
Tool change time | sec | 2.5 |
Precision | ||
Positioning accuracy(X/Y/Z) | mm | 0.008 |
Repeated Positioning accuracy(X/Y/Z) | mm | 0.005 |
Positioning accuracy(B/C) | sec | 5 |
Repeated Positioning accuracy(B/C) | sec | 2 |
Control system | ||
Control system | FANUC 0i MF | |
X_axis motor | αiF22 | |
Y_axis motor | αiF22 | |
Z_axis motor | αiF22B | |
A_axis motor | αiF12 | |
C_axis motor | αiF8 | |
Spindle motor | αiIT12/12000 | |
Others | ||
Air supply pressure | bar | 6-8 |
Air pressure flux | L/min | 280 |
Weight | T | 7.2 |
Floor area (length*width*height) | mm | 2660*3000*3150 |
