Audited Supplier
C1020
Copper Strips
Air Condition or Refrigerator, Water Tube, Water Heater, Oil Cooler Pipe
Red Copper
Round
Non-alloy
Purple
GB/T
Estar
Wooden Packaging
C1020
Ningbo
7411219000
Product Description
Has excellent thermal and electrical conductivity ,excellent hot and cold processing performance ,can be welded and brazed ,and has good corrosion resistance.
1)Alloy Designation,Chemical Composition
2)Mchine properties
3)Physical properties,fabrication properties
Used in the manufactuye of autombile water tank tubes,heat sinks,electronic parts,etc.,widely used in photovoltaic, semiconductor,automotive,electronic and electrical fields.
i)Product introduction
ii)Equipment and workshop
1)Alloy Designation,Chemical Composition
| Alloy Designation | Chemical Composition | |||||
| GB | JIS | Cu+Ag % | P % | Fe % | Ni % | Pb % |
| Tu1 | C1020 | ≥99.97 | ≤0.002 | ≤0.004 | ≤0.001 | ≤0.003 |
2)Mchine properties
| Mchine properties | |||||||
| Temper | Hardness | Tension test | Bend properties | IE/mm | |||
| Tensilent strength | Yield strength | Elongation | Bend angle | Bend radius | |||
| 060 | ≤70 | ≥195 | - | ≥30 | 180° | laminating | ≥7.5 |
| H01 | 60-95 | 215-295 | - | ≥25 | - | ≥7.0 | |
| H02 | 80-110 | 245-345 | - | ≥8 | Thickness*1 | ≥5.5 | |
| H04 | 90-120 | 295-395 | - | ≥3 | Thickness*1.5 | - | |
| H06 | ≥110 | ≥350 | - | - | - | - | |
3)Physical properties,fabrication properties
| Physical properties | fabrication properties | ||||||||||
| Desity g/cm³ | Electrical conductivity %IACS | Thermal conductivity W(m.K) | Modulus of elasticity GPa | Specific heat J/(g.K) | Thermal expansion coefficien /K | Cold hot- workability | Machinability | Electric plating property | Hot dip tin plating property | Weldability | Corrosion |
| 8.83 | ≥98 | 385 | 117 | 0.385 | 18 | Excellent | Suitable | Excellent | Excellent | Good | Excellent |
Used in the manufactuye of autombile water tank tubes,heat sinks,electronic parts,etc.,widely used in photovoltaic, semiconductor,automotive,electronic and electrical fields.
i)Product introduction
ii)Equipment and workshop
