Audited Supplier
RC2280
1
1
Horizontal Lathe
Chuck CNC Lathe
Inclined Guide Rail
Single-tool Holder CNC Lathe
Hydraulic Pressure
CNC
Automatic
Floor-type
High Precision
CE
New
DRC
Packing in Seaworthy Wooden Cases
Dimension(L*W*H): 8000*3800*2000mm
China
Product Description
High Speed RCQ2280 Large-diameter Heavy Parts Deep Hole Drilling And Boring Machine
RCQ2180/RCQ2280 deep hole drilling and boring machine
Machine tool application: It can complete the drilling, boring and nesting of large-diameter heavy parts. Processing technology: The workpiece rotates at low speed during processing, and the tool rotates and feeds at high speed. When drilling, the technology of chip removal in BTA is adopted, and when boring, the cutting fluid in the boring bar is used to discharge cutting fluid forward (the head end of the bed), and the technology of chip removal. The nesting adopts the process of external chip removal, and needs to be equipped with special nesting tools, tool holders and special fixtures. According to the needs of processing, the machine tool is equipped with a drill (boring) bar box, and the tool can be rotated and fed.
Machine use:
♦It can complete the drilling, boring and nesting of large diameter heavy parts and deep holes.
Processing technology:
♦ During processing, the workpiece rotates at low speed, and the tool rotates and feeds at high speed.
♦When drilling, the technology of chip removal in BTA is adopted.
♦When boring a hole, the cutting fluid in the boring bar is supplied to the front (the head end of the bed) to discharge the cutting fluid and chips. ♦The nesting adopts the process of external chip removal, and needs to be equipped with special nesting tools, tool holders and special fixtures.
♦ According to the needs of processing, the machine tool is equipped with a drill (boring) bar box, and the tool can be rotated and fed.
Machine tool application: It can complete the drilling, boring and nesting of large-diameter heavy parts. Processing technology: The workpiece rotates at low speed during processing, and the tool rotates and feeds at high speed. When drilling, the technology of chip removal in BTA is adopted, and when boring, the cutting fluid in the boring bar is used to discharge cutting fluid forward (the head end of the bed), and the technology of chip removal. The nesting adopts the process of external chip removal, and needs to be equipped with special nesting tools, tool holders and special fixtures. According to the needs of processing, the machine tool is equipped with a drill (boring) bar box, and the tool can be rotated and fed.
Machine use:
♦It can complete the drilling, boring and nesting of large diameter heavy parts and deep holes.
Processing technology:
♦ During processing, the workpiece rotates at low speed, and the tool rotates and feeds at high speed.
♦When drilling, the technology of chip removal in BTA is adopted.
♦When boring a hole, the cutting fluid in the boring bar is supplied to the front (the head end of the bed) to discharge the cutting fluid and chips. ♦The nesting adopts the process of external chip removal, and needs to be equipped with special nesting tools, tool holders and special fixtures.
♦ According to the needs of processing, the machine tool is equipped with a drill (boring) bar box, and the tool can be rotated and fed.
Machine main parts: Machine bed , headstock, oil pressure head, one set drill bar support rest, sliding guide rail, rack and pinion, coolant system, DELTA PLC control system, electric cabinet, one set center rest and so on . Workpiece clamping One end of the workpiece is clamped by the manual three-jaw chuck of headstock , oil pressure head tighten another end automatically(workpiece OD chamfer 4X30°), center rest support the workpiece . The gears are machined by precision grinding , gear surface is quenched by high frequency quenching, and the hardness of the tooth surface is HRC48-52, so that the gear can obtain high strength, high hardness, high wear resistance and high fatigue limit, and can withstand relatively large alternating load and shock load. In order to improve the service life of gears and bearings, lubricating oil is used to circulate lubrication.The main technical parameters |
Operating range TSQ2180 TSQ2280 |
Drilling diameter range-- --Φ40~Φ120mm-- --None |
Maximum diameter of boring hole-- Φ800mm------ Φ800mm |
Nest diameter range-- Φ120~Φ340mm---- Φ120~Φ340mm |
The maximum depth of boring -- 1-16m (one specification per meter) -- 1-16m (one specification per meter) |
Clamping diameter range of center frame - Φ120~Φ800mm---- Φ120~Φ800mm |
Workpiece holder clamping diameter range - Φ300~Φ1000mm-- Φ300~Φ1000mm |
Spindle part |
Spindle center height---- 800mm-------- 800mm |
Headstock spindle bore --- Φ120mm-------- Φ120mm |
Taper hole at the front end of the spindle of the headstock-- Φ140mm 1:20-- Φ140mm 1:20 |
Headstock spindle speed range--16~270r/min;12 grades--16~270r/min;12 grades |
Feed section |
Feed speed range---- 10-300mm/min; stepless---- 10-300mm/min; stepless |
Fast moving speed of carriage-- 2m/min-------- 2m/min |
Motor part |
Main motor power---- 45kW-------- 45kW |
Hydraulic pump motor power --- 1.5kW--------- 1.5kW |
Fast moving motor power - 5.5 kW -------- 5.5 kW |
Feed motor power---- 7.5kW (servo motor)-- 7.5kW (servo motor) |
Cooling pump motor power -- 11kWx2+5.5kWx2 (4 groups) -- 5.5kWx3 |
Other parts |
Rail width -------- 1000mm------- 1000mm |
Rated pressure of cooling system-- 2.5MPa------ 0.35MPa |
Cooling system flow---- 200, 400, 600, 800L/min-- 300, 600, 900L/min |
Rated working pressure of hydraulic system - 6.3MPa------ 6.3MPa |
The maximum axial force of the oil dispenser - 68kN------ 68kN |
The maximum tightening force of the oil feeder to the workpiece - 20 kN---- 20 kN |
Drill pipe box part (optional) |
Drill pipe box spindle hole diameter-- Φ100mm------ None |
Taper hole at the front end of the main shaft of the drill pipe box - Φ120mm 1:20---- None |
Spindle speed range of drill pipe box-82~490r/min; Grade 6-None |
Drill pipe box motor power-- 30KW-------- None |
