Audited Supplier
HXSM
Process Wood Chips to Sawdust
Agricultural Hammer Mill
Hammer
8-12mm
Screw Conveyor+Cyclone
Hammer Crusher
Wood
Electric
Intermediate Crusher
Grinding and Impact
Fixed Culling
Hard Alloy
Outer Surface Process
>300MPA
Universal Tongs
Technical Support Through Life Span of The Machine
1 Year
HX for Agricultural Hammer Mill
FCL for Agricultural Hammer Mill
FCL for Agricultural Hammer Mill
Shandong China
8465990000
Product Description
Agricultural Hammer Mill is a kind of advanced crushing machine for getting fine material. This product series has advantages of many grinders. It comes into being based on the theories of shock, shear, collision, and grinding. Agricultural Hammer Mill process small logs, branches, roots, waste rubber, PVC foam board, straw and weed, coconut shell, palm shell, wood chips etc.for biomass fuel factory, biomass power plant, animal feed, chemical plant.
1) Advanced processing equipment, 1260mm gantry milling, process rotor integrally, guaranteed balance and stability.
2) The shell adopts welded-steel plate construction, the main machine is embedded for seal, completely avoids dust spillover and maintains a clean work environment.3) The motor supply power to the machine by drum coupling directly. Built-in rotor, grinding at all angle, uniform output size.
4) Low rotation speed and high line speed, more stable performance and higher productivity.
5) Exclusive design of pull-out type wear-resistant plate, easy maintenance.
1) Exclusive design of multi-ladder hammer, high productivity.
2) Forged hammers are symmetric homogeneous permutation, small vibration without blind angle, large crushing friction area, wearing resisting material, big wrapping angle.
3) Special fastener for esay assemble and disassemble of hammer, Wearing resisting material 30Mn alloy, enhanced for better wear-resistance and longer service span, special treatment for grinding edge, more durable.
2) Forged hammers are symmetric homogeneous permutation, small vibration without blind angle, large crushing friction area, wearing resisting material, big wrapping angle.
3) Special fastener for esay assemble and disassemble of hammer, Wearing resisting material 30Mn alloy, enhanced for better wear-resistance and longer service span, special treatment for grinding edge, more durable.
All rotor will go through strict Dynamic balance test to guarantee running stability after finish manufacturing and assembling.
2 separate arc side door ensures easy observation and replacement of the screen, hammer and rotor, without disturbing wind and flying dust.
The draught fan's efficiency is maximized by faster pneumatic conveying and minimum wind resistance.
The output sawdust is conveyed by screw conveyor with high efficiency and low maintenance cost.
| Machine name | Agricultural Hammer Mill | |||||
| Model | HXSM530 | HXSM680 | HXSM1404-100 | HXSM1404-110 | HXSM1404-110A | HXSM1404-130 |
| Input size (mm) | 900 x 630 | 1100 x 630 | 580 x 1000 | 580 x 1100 | 580 x 1100 | 580 x 130 |
| Speed of main shaft (RPM) | 1485 | 1485 | 1485 | 1485 | 1485 | 1485 |
| Main power (kw-4 ) | 90 | 132 | 160-200 | 250 | 280 | 315 |
| Rotor diameter (mm) | 830 | 980 | 1400 | 1400 | 1400 | 1400 |
| Hammer Qty (pieces) | 72 | 80 | 72 | 80 | 80 | 96 |
| Cyclone model | HXS1000 | HXS1000 | HXS13A | HXS13A(1350) | HXS13A | HXS15A(1500) |
| Diameter of cyclone (mm) | 1000 | 1000 | 1350 | 1350 | 1350 | 1500 |
| Airlock of cyclone (kw) | 2.2 | 3 | 4 | 4 | 4 | 5.5 |
| Fan power (kw) | 5.5 | 5.5 | 30 | 30 | 30 | 30 |
| Screen area (m²) | 1.72 | 2.51 | 3.4 | 3.74 | 3.74 | 4.38m² |
| Discharege screw conveyor | D: 300 mm | D: 400 mm | D: 400 mm | D: 400 mm | D: 400 mm | D: 500mm |
| L: 2.8 m | L: 3 m | L: 5 m | L: 5 m | L: 5 m | L: 5m | |
| Motor:4 kw | Motor: 4 kw | Motor: 5.5 kw | Motor: 5.5 kw | Motor: 5.5 kw | Motor: 7.5kw | |
| Bag Qty (pcs) | 20 | 20 | 50 | 50 | 50 | 50 |
| Screw conveyor of bag filter | N/A | N/A | D: 270mm, L: 5.2m, Motor:4kw | D: 270mm, L: 5.2m, Motor:4kw | D: 270mm, L: 5.2m, Motor:4kw | D: 270mm, L: 5.2m, Motor:4kw |
| Air lock of bag filter (kw) | 1.5 | 1.5 | 1.5 | 1.5 | ||
| Capacity (T/H) | 2-3 | 3-5 | 7-9 | 8-10 | 10-12 | 13-16 (10-14) |
| Screen mesh size (mm) | D: 12 | D: 12 | D: 12 | D: 12 | D: 12 | D: 12 |
| Main machine dimen (m) | 2.5 x 1.4 x 2.2 | 2.9 x 1.6 x 2.5 | 3 x 2 x 2.5 | 3.25 x 2 x 2.56 | 3.25 x 2 x 2.56 | 3.5 x 2 x 2.5 |
| Bag filter dimension (m) | 2.6 x 1.5 x 4 | 2.6 x 1.5 x 4 | 5.6 x 2.1 x 2.3 | 5.6 x 2.1 x 2.3 | 5.6 x 2.1 x 2.3 | 5.6 x 2.1 x 2.3 |
| Cyclone dimension (m) | 1.1 x 1.1 x 3 | 1.1 x 1.1 x 3 | 1.9 x 1.7 x 3.2 | 1.9 x 1.7 x 3.2 | 1.9 x 1.7 x 3.2 | 2.2 x 1.72 x 3.6 |
Shandong Hongxin Machinery Co., Ltd
Our company is a professional manufacturer of log debarker, wood chipper, horizontal grinder, tub grinder, hammer mill and wood pellet mill.
Our company has introduced a series of advanced equipment including CNC Lathe, CNC Milling machine, Planer, Drilling machine, Sawing machine, CNC Boring machine, Balancing machine, Coiling machine. Meanwhile, we have obtained ISO 9001, CE certificates and many patents.
With a complete understanding of the requirements of both our customer and the industry, we offer defect-free equipment and services.
We have obtained ISO 9001, CE certificates and many patents.
