Audited Supplier
HXSM
Process Wood Chips to Sawdust
Hammer Mill
Hammer
8-12mm
Screw Conveyor+Cyclone
Hammer Crusher
Wood
Electric
Intermediate Crusher
Grinding and Impact
Fixed Culling
Hard Alloy
Outer Surface Process
>300MPA
Universal Tongs
Technical Support Through Life Span of The Machine
1 Year
HX
Flc
ISO
Shandong China
8465990000
Product Description
Hammer mill is a kind of advanced crushing machine for getting fine material. This product series has advantages of many grinders. It comes into being based on the theories of shock, shear, collision, and grinding.
It crush small logs, branches, roots, waste rubber, PVC foam board, straw and weed, coconut shell, palm shell, wood chips etc.for biomass fuel factory, biomass power plant, animal feed, chemical plant.
It crush small logs, branches, roots, waste rubber, PVC foam board, straw and weed, coconut shell, palm shell, wood chips etc.for biomass fuel factory, biomass power plant, animal feed, chemical plant.
1) Advanced processing equipment, 1260mm gantry milling, process rotor integrally, guaranteed balance and stability.
2) Low rotation speed and high line speed, more stable performance and higher productivity.
3) Built-in rotor, grinding at all angle, uniform output size.
4) Exclusive design of pull-out type wear-resistant plate, easy maintenance.
2) Low rotation speed and high line speed, more stable performance and higher productivity.
3) Built-in rotor, grinding at all angle, uniform output size.
4) Exclusive design of pull-out type wear-resistant plate, easy maintenance.
1) Exclusive design of multi-ladder hammer, protect the paper fiber, high productivity.
2) Forged hammers are symmetric homogeneous permutation, small vibration without blind angle, large crushing friction area, wearing resisting material, big wrapping angle.
3) Special fastener for esay assemble and disassemble of hammer, materia is 30Mn alloy, special treatment for grinding edge, wear-resistenet, more durable.
2) Forged hammers are symmetric homogeneous permutation, small vibration without blind angle, large crushing friction area, wearing resisting material, big wrapping angle.
3) Special fastener for esay assemble and disassemble of hammer, materia is 30Mn alloy, special treatment for grinding edge, wear-resistenet, more durable.
All rotor will go through strict Dynamic balance test to guarantee running stability after finish manufacturing and assembling.
2 separate arc side door ensures easy observation and replacement of the screen, hammer and rotor, without disturbing wind and flying dust.
| Model | HXSM530 | HXSM680 | HXSM1404-100 | HXSM1404-110 | HXSM1404-110A | HXSM1404-130 |
| Input size (mm) | 900 x 630 | 1100 x 630 | 580 x 1000 | 580 x 1100 | 580 x 1100 | 580 x 130 |
| Speed of main shaft (RPM) | 1485 | 1485 | 1485 | 1485 | 1485 | 1485 |
| Main power (kw-4 ) | 90 | 132 | 160-200 | 250 | 280 | 315 |
| Rotor diameter (mm) | 830 | 980 | 1400 | 1400 | 1400 | 1400 |
| Hammer Qty (pieces) | 72 | 80 | 72 | 80 | 80 | 96 |
| Cyclone model | HXS1000 | HXS1000 | HXS13A | HXS13A(1350) | HXS13A | HXS15A(1500) |
| Diameter of cyclone (mm) | 1000 | 1000 | 1350 | 1350 | 1350 | 1500 |
| Airlock of cyclone (kw) | 2.2 | 3 | 4 | 4 | 4 | 5.5 |
| Fan power (kw) | 5.5 | 5.5 | 30 | 30 | 30 | 30 |
| Screen area (m²) | 1.72 | 2.51 | 3.4 | 3.74 | 3.74 | 4.38m² |
| Discharege screw conveyor | D: 300 mm | D: 400 mm | D: 400 mm | D: 400 mm | D: 400 mm | D: 500mm |
| L: 2.8 m | L: 3 m | L: 5 m | L: 5 m | L: 5 m | L: 5m | |
| Motor:4 kw | Motor: 4 kw | Motor: 5.5 kw | Motor: 5.5 kw | Motor: 5.5 kw | Motor: 7.5kw | |
| Bag Qty (pcs) | 20 | 20 | 50 | 50 | 50 | 50 |
| Screw conveyor of bag filter | N/A | N/A | D: 270mm, L: 5.2m, Motor:4kw | D: 270mm, L: 5.2m, Motor:4kw | D: 270mm, L: 5.2m, Motor:4kw | D: 270mm, L: 5.2m, Motor:4kw |
| Air lock of bag filter (kw) | 1.5 | 1.5 | 1.5 | 1.5 | ||
| Capacity (T/H) | 2-3 | 3-5 | 7-9 | 8-10 | 10-12 | 13-16 |
| Screen mesh size (mm) | D: 12 | D: 12 | D: 12 | D: 12 | D: 12 | D: 12 |
| Main machine dimen (m) | 2.5 x 1.4 x 2.2 | 2.9 x 1.6 x 2.5 | 3 x 2 x 2.5 | 3.25 x 2 x 2.56 | 3.25 x 2 x 2.56 | 3.5 x 2 x 2.5 |
| Bag filter dimension (m) | 2.6 x 1.5 x 4 | 2.6 x 1.5 x 4 | 5.6 x 2.1 x 2.3 | 5.6 x 2.1 x 2.3 | 5.6 x 2.1 x 2.3 | 5.6 x 2.1 x 2.3 |
| Cyclone dimension (m) | 1.1 x 1.1 x 3 | 1.1 x 1.1 x 3 | 1.9 x 1.7 x 3.2 | 1.9 x 1.7 x 3.2 | 1.9 x 1.7 x 3.2 | 2.2 x 1.72 x 3.6 |
