Audited Supplier
C7027A1049
Industrial Gas Burner
ISO, CE
New
Ultra Quiet
Flame Detector
Control Gas
C7027A1049
Jate
Flame Detector
Normal
17nm
2-3 Days
EXW/Fob
Silver
Gas Burner Accessories
Video Technical Support
4-20mA
30s
2 Spdt
Hydrogen, Nitrogen, Ng and LPG
Small
JATE
Carton
10*9*8CM
China
8403900000
Product Description
JATE C7027A1049 Flame Detector Industrial Flame Ultraviolet UV Sensor For
Burner
Burner
Description:
Detects ultraviolet light produced during combustion
Matching products: Flame amplifier: R7249A, B, R7849A, B, R7749B, R7259, R7290
Certification: Canadian Standards
Association: Certified: Master Report LR95329-1
Factory Mutual: Approved: Report NO. 24181.03 Industrial Risk
Matching products: Flame amplifier: R7249A, B, R7849A, B, R7749B, R7259, R7290
Certification: Canadian Standards
Association: Certified: Master Report LR95329-1
Factory Mutual: Approved: Report NO. 24181.03 Industrial Risk
Description | UV, Minipeeper |
Application | Coal Burner; Gas Burner; Oil Burner |
Installation | Combination nut for 1/2 inch sight pipe installation. |
Vibration level | 0.5g max |
Electrical Connections | 2 NEC Class 1 conductors |
Ambient Temperature Range | 0 F to 215 F (-18 C to +102 C) |
Use:
Flame detectors are used to monitor gas flames, yellow or blue fuel combustion flames, and calibration of ignition sparks.
FEATURES:
JATE C7027A1049 Flame Detector Industrial Flame Ultraviolet UV Sensor For
Burner
The compact flame detector combines the flame safety controller and the ultraviolet amplifier to complete the control of the flame system.
• For use with Honeywell flame safety master controllers and combustion requiring UV flame detection on the device.
• Mount the C7027 on a 1/2 inch viewing pipe via a combi port.
• The detectors can be connected in parallel when it is difficult to observe.
• When properly installed, the C7027 seal will withstand pressures up to 5psi (34.5Pa).
• Due to the compact size, additional air ducts are allowed.
• The C7044 is mounted by two screw brackets.
• The C7044 UV sensor tube is housed in a stainless steel housing.
• In flame monitoring applications, the C7044 can be viewed from the side or bottom.
• For use with Honeywell flame safety master controllers and combustion requiring UV flame detection on the device.
• Mount the C7027 on a 1/2 inch viewing pipe via a combi port.
• The detectors can be connected in parallel when it is difficult to observe.
• When properly installed, the C7027 seal will withstand pressures up to 5psi (34.5Pa).
• Due to the compact size, additional air ducts are allowed.
• The C7044 is mounted by two screw brackets.
• The C7044 UV sensor tube is housed in a stainless steel housing.
• In flame monitoring applications, the C7044 can be viewed from the side or bottom.
JATE C7027A1049 Flame Detector Industrial Flame Ultraviolet UV Sensor ForBurner
